Article ID: 195769
Article Last Modified on 11/26/2003
APPLIES TO
- Microsoft SNA Server 3.0 Service Pack 4
- Microsoft SNA Server 3.0 Service Pack 2
- Microsoft SNA Server 3.0 Service Pack 3
- Microsoft SNA Server 4.0
This article was previously published under Q195769
SYMPTOMS
The following events are logged in the Windows NT Application Event Log after disconnecting a 5250 display session in the 5250 Applet included with SNA Server:
Event ID: 92
Source: SNA APPC Application
Description: APPC TP detected abend of SNA subsystem
Event ID: 38
Source: SNA Server
Description: APPC session deactivated abnormally
Qualifier = 0005
Connection = <connection name>
LU alias = <Local APPC LU Alias>
PLU alias = <Remote APPC LU Alias>
Mode name = QPCSUPP
Session ID = <session ID>
LFSID = <LFSID>
Client Domain = <client's domain>
Client User = <User ID>
Client Machine = <TCP/IP Address/NetBIOS name>
These events are logged even though the 5250 display session is properly disconnected using the Session Disconnect option.
NOTE: Although this has only been observed with SNA Server's 5250 Applet, it could occur with any APPC application that calls the TEST_RTS_AND_POST verb to detect direction change for the conversation being used.
CAUSE
The 5250 Applet included with SNA Server 3.0 Service Pack 2 was modified to use the APPC TEST_RTS_AND_POST verb to detect change of direction for its APPC conversation. This was done as a performance enhancement. After this change was made, disconnecting a 5250 session in the 5250 Applet causes the TEST_RTS_AND_POST verb to be cancelled. The mechanism used to cancel this outstanding verb causes the Event 92 and 38 to be logged.
RESOLUTION
Microsoft has confirmed this to be a problem in SNA Server versions 3.0 SP2, 3.0 SP3, 4.0, and 4.0 SP1. We are researching this problem in SNA Server version 3.0 and will post more information here in the Knowledge Base as it becomes available.
This problem was corrected in the latest Microsoft SNA Server version 4.0 U.S. Service Pack. For information on obtaining this Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces):
S E R V P A C K
MORE INFORMATION
In this case, the event 38 and 92 messages are benign and do not indicate a problem. However, these events may be logged for other reasons that do indicate a problem. The following is a more detailed explanation of the Event 38 Qualifier 0005 event:
SNA Server sent an UNBIND(Cleanup) message on this session to the remote system in order to clean up the session.
CAUSE: This problem can be caused by any one of the following:
- The SNA Server client computer (where the 5250 emulator or APPC/CPIC application is running) has lost its network session to the SNA Server.
- The 5250 emulator or APPC/CPIC application issued a TP_ENDED(HARD) to cause the LU6.2 session to be ended.
- The 5250 emulator or APPC/CPIC application failed abnormally or was ended by the user while in the middle of a conversation.
ACTION:
If a 5250 user is losing their emulation session unexpectedly (because of the client's network session being lost to the SNA Server), capture SNA Server client internal trace, a LU6.2 message trace, and an APPC API trace of the problem, along with a matching sniffer or Network Monitor trace showing the lost network session, and provide them to Microsoft support personnel.
Keywords: kbbug kbfix KB195769
