CardBus Cards Not Enumerated on Some PC Card Controllers |
Q182591
The information in this article applies to:
- Microsoft Windows 95 OEM Service Release, versions 2.0, 2.1, 2.5
SYMPTOMS
When you insert a CardBus PC Card in a computer running Microsoft Windows 95 OEM Service Release 2 (OSR2), the PC Card may not function properly.
CAUSE
This problem can occur when the CardBus PC Card is not enumerated properly. This issue is known to occur on computers that use the following PC Card controller chip sets:
- Texas Instruments PCI1220
- Texas Instruments PCI1221
- Texas Instruments PCI1250
- Texas Instruments PCI1250A
CLKRUN is a power-saving feature which turns off the clock signal to PC Cards when they are not in use. When this feature is implemented by the controllers listed above, these controllers do not automatically provide the number of clock cycles most PC Cards need in order to initialize.
RESOLUTION
This issue is resolved by the following updated file(s) for Windows 95 OEM Service Release 2(OSR2):
PCI.VXD version 4.00.1121 dated 3/27/98 11:21am 42,783 bytes
NOTE: In addition to the above file, the updated files described in the following Microsoft Knowledge Base articles are also required for correct CardBus functionality:
Q168909 Query/Remove Support for CardBus Cards Hangs Computer
Q164224 Inserting PC Card in Dock with CardBus Card May Cause Reboot
Q164223 PC Cards May Not Be Recognized in Docking Station
Q163938 Inserting Multifunction PC Card May Hang Computer
STATUS
Microsoft has confirmed this to be a problem in Microsoft Windows 95 OEM Service Release 2 (OSR2). An update to address this problem is now available, but is not fully regression tested and should be applied only to computers experiencing this specific problem. Unless you are severely impacted by this specific problem, Microsoft does not recommend implementing this update at this time. Contact Microsoft Technical Support for additional information about the availability of this update.
This issue is resolved in Microsoft Windows 98.
MORE INFORMATION
You can use Device Manager to determine the chip set of your PC Card controller. To do this, follow these steps:
- Click Start, point to Settings, click Control Panel, and then double- click System.
- Click the Device Manager tab, and then double-click PCMCIA Socket branch to view the list of devices.
For additional information about issues resolved by updates to this component, please see the following articles in the Microsoft Knowledge Base:
Q173677 Audio Problems with Cirrus Logic PD6832 CardBus Controller
Q170324 CMD PCI-0646U Accessed in Compatibility Mode in OSR2
Q164873 PCI Device Not Configured and Resources Unassigned
Q164222 CardBus Card in Docking Station May Not Be Configured
Q163938 Inserting Multifunction PC Card May Hang Computer
Q159543 Intel ProShare PC Card May Hang Computer
Q159492 PC Card Device Not Enumerated When Reinserted
NOTE: Even with this update installed, the following CardBus cards may not function correctly:
- Adaptec 1480 SCSI card (Note: Adaptec 1480A works correctly)
- Melco UltraSCSI card
- Madge Token-Ring card
- Noteworthy video conferencing card
If you experience a problem with one of these cards which is not resolved by this update, please contact the manufacturer of the CardBus card to inquire about a possible hardware update to address this issue.
For information about an additional issue that may not be resolved by this update, please see the following article in the Microsoft Knowledge Base:
Q185073 CardBus Controller Displays Error Code 29 on IBM ThinkPad
Additional query words: pcmcia card bus
Keywords : kbhw osr2 win95
Issue type : kbprb
Technology : kbWin95search kbOPKSearch kbWin95OPKOSR25 kbWin95OPKOSR210
Last Reviewed: June 13, 2001 |