Microsoft KB Archive/138618

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 09:05, 21 July 2020 by X010 (talk | contribs) (Text replacement - """ to """)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Knowledge Base

ErrMsg: "No Configuration Info ..." with PCMCIA

Article ID: 138618

Article Last Modified on 10/31/2006


  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Workstation 4.0 Developer Edition
  • Microsoft Windows NT Server 3.51
  • Microsoft Windows NT Server 4.0 Standard Edition

This article was previously published under Q138618


When you install a PCMCIA card that is not registered in the registry database, the following error message appears in the event log:

No configuration information for <adapter name>


The Windows NT registry contains a database entry for the PCMCIA cards that Windows NT supports. This can be found in the key:


The error message appears if your PCMCIA card is not in the database.


  1. Run PCMCMD.EXE. You can find this tool on Windows NT CD-ROM in the \SUPPORT\DEBUG\I386 directory. Pipe the output to a file. For example:


  1. From the output, record the "product name" and the "manufacturer name".
  2. Run Registry Editor (REGEDT32.EXE). WARNING: Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk.

  1. From the


  1. Select Database
  2. Select Add Key from the Edit menu
  3. Enter the manufacturer name and choose the OK button For example, "National Semiconductor"
  4. Select the manufacturer name
  5. Select Add Key from the Edit menu again
  6. Enter the product name and choose the OK button.

For example, "InfoMover NE4100"

  1. Select the product name
  2. Select Add Value from the Edit menu
  3. Enter the word, "Driver," (without the quotation marks)
  4. Select the type, REG_SZ, and choose the OK button
  5. Enter the filename of the driver for the card WITHOUT the ".SYS"

extension and choose the OK button. For example, "ne2000"

  1. Shutdown and restart Windows NT.

Additional query words: prodnt

Keywords: kbenv KB138618