Err Msg: Processor in Slot 1 Failed |
Q111478
The information in this article applies to:
- Microsoft Windows NT Server version 3.1
- Microsoft Windows NT Workstation version 3.1
- Microsoft Windows NT Advanced Server, version 3.1
SUMMARY
If you add an additional processor to the Compaq Proliant 2000, Windows NT may report "processor in slot 1 failed" during startup.
To resolve this problem, perform the following steps:
- Be sure to use processor board #148677-001 Rev level F or higher.
- Upgrade the firmware ROM on the Proliant 2000 motherboard to 010594 or higher. You can download the firmware update file (in compressed PKZip format) from the COMPAQ forum on CompuServe.
Additional query words: prodnt smp multiprocessor dual
Keywords : kbhw
Issue type :
Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW310 kbWinNTSsearch kbWinNTS310 kbWinNTAdvSerSearch kbWinNTAdvServ310 kbWinNTS310xsearch kbWinNT310xSearch kbWinNTW310Search
Last Reviewed: October 27, 2000 |