Microsoft KB Archive/100699: Difference between revisions
(importing KB archive) |
m (Text replacement - """ to """) |
||
Line 36: | Line 36: | ||
<br /> | <br /> | ||
* the | * the "Generic Kernel" protocol driver can be used as a transport for just PC/TCP applications in conjunction with a LAN Manager Transport providing services for the LAN Manager redirector and software | ||
* it can also be used as a LAN Manager transport through FTP's NetBIOS driver | * it can also be used as a LAN Manager transport through FTP's NetBIOS driver | ||
Line 48: | Line 48: | ||
First install the LAN Manager Enhanced Workstation software and use NetBEUI as the transport protocol. If you intend to use PC/TCP as the LAN Manager transport, you can remove the LOAD NETBEUI command from AUTOEXEC.BAT.<br /> | First install the LAN Manager Enhanced Workstation software and use NetBEUI as the transport protocol. If you intend to use PC/TCP as the LAN Manager transport, you can remove the LOAD NETBEUI command from AUTOEXEC.BAT.<br /> | ||
<br /> | <br /> | ||
Then install the PC/TCP software as instructed in its | Then install the PC/TCP software as instructed in its "Installation and Configuration Guide" under the section describing using an NDIS driver with the generic kernel. If you want to use the PC/TCP kernel as the LAN Manager transport, you need a copy of NETBIND.COM--you can use the version provided with PC/TCP on the "Unsupported Network Software" diskette. You can ignore the section on modifying PROTOCOL.INI.<br /> | ||
<br /> | <br /> | ||
A sample of the configuration files are given here for using the PC/TCP as a LAN Manager transport. Several important notes are listed at the end of the article. | A sample of the configuration files are given here for using the PC/TCP as a LAN Manager transport. Several important notes are listed at the end of the article. | ||
Line 85: | Line 85: | ||
C:\PCTCP\NETBIND.COM (*3) | C:\PCTCP\NETBIND.COM (*3) | ||
C:\PCTCP\ETHDRV.EXE (*4) | C:\PCTCP\ETHDRV.EXE (*4) | ||
c:\pctcp\netbios -S | c:\pctcp\netbios -S "" (*5) | ||
rem ******* PC/TCP INSTALL ADDED LINE(S) - END ****** | rem ******* PC/TCP INSTALL ADDED LINE(S) - END ****** | ||
NET START WORKSTATION | NET START WORKSTATION | ||
Line 100: | Line 100: | ||
SESSIONS = 6 | SESSIONS = 6 | ||
NCBS = 12 | NCBS = 12 | ||
BINDINGS = | BINDINGS = "ELNKII_NIF" | ||
LANABASE = 0 | LANABASE = 0 | ||
Line 116: | Line 116: | ||
INTVEC = 0x60 | INTVEC = 0x60 | ||
DRIVERNAME = PKTDRV$ | DRIVERNAME = PKTDRV$ | ||
BINDINGS = | BINDINGS = "ELNKII_NIF" | ||
</pre> | </pre> | ||
NOTES:<br /> | NOTES:<br /> |
Latest revision as of 13:28, 19 July 2020
Article ID: 100699
Article Last Modified on 7/30/2001
This article was previously published under Q100699
SUMMARY
FTP Software's PC/TCP can be used several ways with LAN Manager on an MS-DOS enhanced workstation.
- the "Generic Kernel" protocol driver can be used as a transport for just PC/TCP applications in conjunction with a LAN Manager Transport providing services for the LAN Manager redirector and software
- it can also be used as a LAN Manager transport through FTP's NetBIOS driver
To do this, you need the NDIS driver version of PC/TCP and FTP's NetBIOS driver. The tests on which this article is based were conducted using version 2.2 of PC/TCP, which includes both drivers.
MORE INFORMATION
First install the LAN Manager Enhanced Workstation software and use NetBEUI as the transport protocol. If you intend to use PC/TCP as the LAN Manager transport, you can remove the LOAD NETBEUI command from AUTOEXEC.BAT.
Then install the PC/TCP software as instructed in its "Installation and Configuration Guide" under the section describing using an NDIS driver with the generic kernel. If you want to use the PC/TCP kernel as the LAN Manager transport, you need a copy of NETBIND.COM--you can use the version provided with PC/TCP on the "Unsupported Network Software" diskette. You can ignore the section on modifying PROTOCOL.INI.
A sample of the configuration files are given here for using the PC/TCP as a LAN Manager transport. Several important notes are listed at the end of the article.
CONFIG.SYS
device = c:\dos\himem.sys device = c:\dos\emm386.exe noems x=d800-dfff dos=high,umb files=30 buffers=20 rem ***** LASTDRIVE=Z DEVICEHIGH=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS DEVICEHIGH=C:\LANMAN.DOS\DRIVERS\ETHERNET\ELNKII\ELNKII.DOS rem ******* PC/TCP INSTALL ADDED LINE(S) - BEGIN ****** rem ** If you do not have protman and ndis driver already loaded ** rem ** before this, please do so. ** DEVICEHIGH=C:\PCTCP\DIS_PKT.gup (*1) rem ******* PC/TCP INSTALL ADDED LINE(S) - END ******
AUTOEXEC.BAT
rem ******* PC/TCP INSTALL ADDED LINE(S) - BEGIN ****** rem **** @REM ==== LANMAN 2.2 === DO NOT MODIFY BETWEEN THESE LINES === LANMAN 2.2 ==== SET PATH=C:\LANMAN.DOS\NETPROG;%PATH% @REM ==== LANMAN 2.2 === DO NOT MODIFY BETWEEN THESE LINES === LANMAN 2.2 ==== rem ******* PC/TCP INSTALL ADDED LINE(S) - BEGIN ****** LOADHIGH C:\WINDOWS\SMARTDRIVE.EXE LOADHIGH C:\DOS\SHARE.EXE LOADHIGH C:\DOS\DOSKEY.COM SET PATH=C:\PCTCP;%PATH% SET PCTCP=C:\PCTCP\PCTCP.INI (*2) C:\PCTCP\NETBIND.COM (*3) C:\PCTCP\ETHDRV.EXE (*4) c:\pctcp\netbios -S "" (*5) rem ******* PC/TCP INSTALL ADDED LINE(S) - END ****** NET START WORKSTATION
PROTOCOL.INI
[PROTMAN] DRIVERNAME = PROTMAN$ DYNAMIC = YES PRIORITY = NETBEUI [NETBEUI_XIF] Drivername = netbeui$ SESSIONS = 6 NCBS = 12 BINDINGS = "ELNKII_NIF" LANABASE = 0 [ELNKII_NIF] ; ; 3c503 3Com EtherLink II adapter ; DRIVERNAME = ELNKII$ INTERRUPT = 3 IOADDRESS = 0x300 DMACHANNEL = 1 [PKTDRV] CHAINVEC = 0x62 INTVEC = 0x60 DRIVERNAME = PKTDRV$ BINDINGS = "ELNKII_NIF"
NOTES:
(*1) This is the packet driver to NDIS converter module and must be loaded.
(*2) This is the configuration module for the PC/TCP Kernel. The interface= parameter in the [pctcp kernel] section of this file must be set to the kernel driver loaded (see below) for proper operation.
(*3) Netbind is used to bind the NDIS driver to the PC/TCP coversion module.
(*4) This is the PC-210 Generic Kernel for DIX Ethernet. IEEEDRV.EXE is used for 802.3 Ethernet and TOKDRV.EXE is used for 802.5 Token Ring.
(*5) This is the PC/TCP NetBIOS driver which must be loaded for RFC 1001 and 1002 compliance to provide a session layer to allow LAN Manager to communicate with the PC/TCP Kernel.
REFERENCES
PC/TCP Installation Guide.
Keywords: KB100699