Article ID: 51412
Article Last Modified on 11/21/2006
APPLIES TO
- Microsoft GW-BASIC 3.2, when used with:
- Microsoft MS-DOS 6.22 Standard Edition
- Microsoft GW-BASIC 3.22, when used with:
- Microsoft MS-DOS 6.22 Standard Edition
- Microsoft GW-BASIC 3.23, when used with:
- Microsoft MS-DOS 6.22 Standard Edition
- Microsoft BASIC Compiler 6.0
- Microsoft BASIC Compiler 6.0b
- Microsoft QuickBasic 1.0, when used with:
- Microsoft MS-DOS 6.22 Standard Edition
- Microsoft QuickBasic 1.01, when used with:
- Microsoft MS-DOS 6.22 Standard Edition
- Microsoft QuickBasic 1.02, when used with:
- Microsoft MS-DOS 6.22 Standard Edition
- Microsoft QuickBasic 2.0, when used with:
- Microsoft MS-DOS 6.22 Standard Edition
- Microsoft QuickBasic 2.01, when used with:
- Microsoft MS-DOS 6.22 Standard Edition
- Microsoft QuickBasic 3.0, when used with:
- Microsoft MS-DOS 6.22 Standard Edition
- Microsoft QuickBasic 4.0, when used with:
- Microsoft MS-DOS 6.22 Standard Edition
- Microsoft QuickBASIC 4.0b, when used with:
- Microsoft MS-DOS 6.22 Standard Edition
- Microsoft QuickBasic 4.5 for MS-DOS, when used with:
- Microsoft MS-DOS 6.22 Standard Edition
- Microsoft QuickBasic Compiler for Macintosh 1.0
- Microsoft BASIC Compiler 6.0b, when used with:
- Apple Macintosh OS X
- Microsoft BASIC Interpreter 1.0
- Microsoft BASIC Interpreter 1.01 for Macintosh
- Microsoft BASIC Interpreter 2.0
- Microsoft BASIC Interpreter 2.1 for Macintosh
- Microsoft BASIC Interpreter 3.0 for Macintosh
This article was previously published under Q51412
SUMMARY
This article describes the format with which the graphics GET statement stores graphics in an array.
This article applies to Microsoft GW-BASIC Interpreter Versions 3.20, 3.22, 3.23 for MS-DOS, Microsoft BASIC Compiler Versions 6.00 and 6.00b for MS-DOS and MS OS/2, Microsoft QuickBASIC Versions 1.00, 1.01, 1.02, 2.00, 2.01, 3.00, 4.00, 4.00b and 4.50 for MS-DOS, Microsoft QuickBASIC Version 1.00 for the Apple Macintosh, Microsoft BASIC Compiler Version 1.00 for the Apple Macintosh, and Microsoft BASIC Interpreter Versions 1.00, 1.01, 2.00, 2.10, and 3.00 for the Apple Macintosh.
This internal product information is provided as is, and may be subject to change or nondisclosure in future versions of BASIC.
MORE INFORMATION
The graphics GET statement transfers a screen image into a specified array. The first 4 bytes in the array are two integers which specify how wide and long the stored image is in pixels, while the rest of the data stored in the array is a binary representation of the stored screen image, as shown in the following diagram:
+------------+------------+
| image width, in pixels | <-- 2-byte integer number
+------------+------------+
| image length, in pixels | <-- 2-byte integer number
+--------+--------+--------+--------+--------+--------+
| | | < binary image data > | |
+--------+--------+--------+--------+--------+--------+
byte #5 byte #6 byte #7
The binary image data depends on the screen mode of the graphic image and is stored linearly in memory by pixel rows and columns. The GET statement scans the screen image by row from left to right and stores the bit representation of each pixel. Each row of the stored data will be padded out to an even byte boundary by NULL bytes (ASCII 0). The following is an example.
Take a square box drawn on the screen and stored with the following program:
SCREEN 2 ' Delete this statement for Macintosh BASICs
DIM box%(1 to 5)
LINE (1, 1)-(10, 3), ,B
GET (1, 1)-(10, 3), box%
The first 4 bytes of box% will be as follows:
box%(1) = 10 ' The box is 10 pixels wide
box%(2) = 3 ' The box is 3 pixels long
The binary representation of the remaining bytes in the box% array is as follows:
box%(3) = 11111111 11000000 <- Note padding of each row of bits
box%(4) = 10000000 01000000 <- Also note how the 1's form a box.
box%(5) = 11111111 11000000
How GET Stores Color on an IBM PC or Compatible
On an IBM PC or compatible, the way the graphics GET statement stores color information depends upon the characteristics of the display mode. For screen modes with a single color plane (SCREENs 1, 2, 3, 11, and 13), each pixel is represented by the number of bits per pixel per plane for the particular display mode. The following is an example.
If the square box given above were drawn in SCREEN mode 1 (2 bits per pixel per plane) with the following program,
SCREEN 1
DIM box%(1 to 7)
LINE (1, 1)-(10, 3), ,B
GET (1, 1)-(10, 3), box%
then the binary representation of the image data bytes (after the 4-byte width and length header) would be as follows:
11111111 11111111 11110000
11000000 00000000 00110000 <- Notice 2 bits per pixel
11111111 11111111 11110000
Since no color was specified, the default color (white) was used (thus all of the color bits were turned on).
For SCREEN modes with multiple color pages (SCREENs 7, 8, 9, 10, and 12), GET stores each display page separately by screen row. GET stores the binary information for one row of the graphics on the first color page and then the same row of graphics on the next color page, padding each row of color page information to an even byte boundary. The following is an example:
If the same square box were drawn in SCREEN mode 12 (four color planes) in red with the following program,
SCREEN 12
COLOR 4 ' select red color
DIM box%(1 to 14)
LINE (1, 1)-(10, 3), ,B
GET (1, 1)-(10, 3), box%
then the binary representation of the image data bytes (again after the 4-byte header) would be as follows:
00000000 00000000 <- blue plane
00000000 00000000 <- green plane
11111111 11000000 <- red plane (note padding to byte boundary)
00000000 00000000 <- intensity plane - first row finished
00000000 00000000 <- blue
00000000 00000000 <- green
10000000 01000000 <- red
00000000 00000000 < - intensity - second row
00000000 00000000
00000000 00000000
11111111 11000000
00000000 00000000 <- last row
GET Doesn't Preserve Color in QuickBASIC for the Macintosh
The graphics GET statement in Microsoft QuickBASIC Version 1.00 for the Macintosh does not preserve the colors of graphics in its array argument, and a subsequent graphics PUT using that array will draw in monochrome, using only the current foreground and background colors.
The following list shows how the GET statement translates pixel colors on the screen and stores them in the array:
- White (or current background color) <= yellow, magenta, cyan, white
- Black (or current foreground color) <= red, green, blue, black
The GET statement captures screen information as a bitmap only. Only the on or off status of each pixel -- not the color information -- is stored in the array.
The ForeColor and BackColor MBLC routines built into QuickBASIC let you change the color used by subsequent graphics statements. Invoking ForeColor and BackColor will cause a subsequent graphics PUT to use that new foreground and background for all pixels drawn.
Note that the earlier products, Microsoft BASIC Compiler Version 1.00 for the Apple Macintosh and Microsoft BASIC Interpreter Versions 1.00, 1.01, 2.00, 2.10, and 3.00 for the Apple Macintosh, do not support ForeColor or BackColor, or any color capabilities.
Additional query words: QuickBas BasicCom MQuickB
Keywords: KB51412
