Article ID: 317722
Article Last Modified on 5/25/2007
APPLIES TO
- Microsoft Exchange 2000 Server Standard Edition
This article was previously published under Q317722
Important This article contains information about how to modify the registry. Make sure that you back up the registry before you modify it. Make sure that you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 Description of the Microsoft Windows registry
SUMMARY
Internet e-mail messages are typically structured in MIME format. In some cases, Microsoft Exchange Server must convert MIME messages to MAPI format.
For Post Office Protocol version 3 (POP3) or Internet Message Access Protocol, version 4rev1 (IMAP4) clients to gain access to that e-mail, the MAPI-formatted content must be converted back to MIME format before the clients can log on. This conversion allows the exact message size to be calculated, although the MIME-converted content is not persisted in the database. If the file is larger than 4 kilobytes (KB), the mail cannot be converted in memory. Therefore, Microsoft Exchange 2000 Server writes a temporary file to the Windows Tmp folder.
Mail is converted to MAPI during the following operations:
- A move-mailbox procedure
- Public folder replication
This may cause POP3 and IMAP4 clients to experience long delays during logon. In some cases, without proper planning or available server resources, this conversion to MAPI may also cause system latencies.
If timeouts occur during the conversion, the following event ID messages are logged in the Application event log:
Event Type: Error
Event Source: ESE
Event ID: 623
Computer: EXCHANGE
Description: Information Store (2048) The version store for instance 0 ("c49a179d-ac1f-4894-8211-0c2917d34500") has reached its maximum size of 108Mb. It is likely that a long-running transaction is preventing cleanup of the version store and causing it to build up in size. Updates will be rejected until the long-running transaction has been completely committed or rolled back. Possible long-running transaction: SessionId: 0x1B6525A0 Session-context: 0x00000000 Session-context ThreadId: 0x00000AF8
Event Type: Error
Event Source: MSExchangeIS Mailbox Store
Event Category: Logons
Event ID: 1022
Computer: EXCHANGE
Description: Logon Failure on database "First Storage Group\Mailbox Store (EXCHANGE)" - Windows NT account DOMAIN\user, mailbox /o=Org/ou=AG/cn=Recipients/cn=user.
MORE INFORMATION
Conditions under which client latencies occur
If all of the users on an Exchange 2000 server are using POP3 or IMAP4 clients, a large number of the messages in the mailboxes are frequently stored in MIME format. If the mailboxes are moved, Exchange 2000 converts all of these messages to MAPI.
Client latencies may occur in the following scenario:
- A large number of these mailboxes have been moved.
- Mail has been converted.
- Users log on and use their POP3 clients (by using RETR commands) or IMAP4 clients (by using FETCH commands) to gain access to mail.
In this scenario, Exchange 2000 must convert the MAPI messages back to MIME. The Windows Tmp folder typically is not on a disk that has a large number of spindles. The disk cannot handle the large number of input/output (I/O) requests caused by a conversion of so many messages. Therefore, a user may experience long delays (up to several minutes) when the user does something as simple as switching between messages on the client. This behavior occurs because the disk that the Tmp folder is located on cannot keep up with all of the disk activity that Exchange 2000 generates to convert messages.
Client latencies may also occur in the following scenario:
- A public folder store contains messages that are in MIME format.
- That data is replicated to another server. The MIME messages in this new server's public folders are converted to MAPI.
- Users use IMAP4 to gain access to the messages on the new server.
In this scenario, Exchange 2000 has to convert the messages back to MIME, which frequently causes similar disk problems.
How to avoid client latencies
You cannot prevent Exchange 2000 from converting messages to MAPI when mailboxes are moved or when public folder data is replicated. Additionally, you cannot set the folder that Exchange 2000 uses to convert the messages in Exchange 2000. Exchange 2000 must use the folder that either the Microsoft Windows TMP system variable or the Windows TMP user variable specifies.
The TMP system variable is used on stand-alone Exchange 2000 servers. The cluster service account user's TMP user variable is used on clustered servers. To avoid the adverse effects of this behavior, change the TMP folder variable that is used to a location represented by a drive that has a high-performance caching controller connected to it and enough spindles to handle the conversions.
Note that on a cluster, when you relocate the Tmp folder to a shared cluster drive, this may cause problems during failover. These problems occur because disk ownership is transferred to a surviving node during failover. Therefore, Microsoft recommends that you do not move the folder to a shared cluster drive. If you can, move the Tmp folder to locally attached storage.
If the Exchange 2000 server has either very limited local disk storage or no local disk storage, and all of the external storage is allocated as shared cluster resources, you may not be able to move the Tmp folder to locally attached storage. As a last resort, either reallocate some of the shared storage as a non-cluster resource, or add additional storage area network (SAN) storage that is not shared among the nodes, so that there is a location that the Tmp folder can be moved to.
To permit users to log on faster, you can also set the following registry keys to turn off exact message-size calculation. One of the keys is for POP3 clients, and the other is for IMAP4 clients.
Warning Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.
POP3 clients
- Registry Key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pop3svc\Parameters - Parameter: Compatibility (REG_DWORD)
- Default setting: Not present
- When to change: Change this setting when you want the store to use approximate message-size calculations. Note that if you change this setting, some older mail clients may no longer operate correctly. This key may break Request for Comments (RFC) compliance.
- Recommended setting: 0xfffffffe
IMAP4 clients
Enable fast message retrieval for IMAP4 users. To do this, follow these steps:
- Open the properties of the IMAP4 virtual server.
- On the General tab, click to select the Enable fast message retrieval check box, and then click OK.
Note After you modify these registry keys, restart the Microsoft Internet Information Services (IIS) Admin service and the Microsoft Exchange information store services. If you are running an Exchange Virtual Server (EVS) and using cluster services, take the EVS offline before you restart these services.
How to determine whether access to the Tmp folder is causing client latencies
To determine whether access to the Tmp folder on the Exchange 2000 server is causing client latencies, use System Monitor to monitor disk I/O activity on the disk where the Tmp folder is located. On the disk where the Tmp folder is located, you may notice the following behaviors:
- Long disk queue lengths
- High disk I/O activity
If your Tmp folder is on a logical disk instead of a dedicated physical disk, the logical disk I/O activity is important. Therefore, you must first install the Logical Disk counters in System Monitor. To do this:
- Click Start, click Run, type cmd, and then press ENTER.
- Type diskperf -yv, and then press ENTER to turn on the disk performance counters for logical drives or storage volumes.
- Restart the computer to load the Logical Disk counters.
For additional information about how to create and use counter logs in which to monitor server performance, click the following article numbers to view the articles in the Microsoft Knowledge Base:
248345 How to Create a Log Using System Monitor in Windows 2000
How to determine how many disk spindles you need
If the average message size is 45 KB, the server does about 3 TMP writes for each RETR (POP3) or FETCH (IMAP4) when the server converts from MAPI to MIME. You can use this value to determine how many disk spindles are necessary on any computer.
For example, assume that a server has 1,000 users. Each user has an Inbox that contains 500 messages, and all of the mailboxes have just been moved. After the move, when users log on and RETR or FETCH their mail at a rate of 42 messages per second, the server performs about 126 writes per second to the TMP drive (3 writes per RETR multiplied by 42 RETR commands per second). One spindle can handle about 100 writes per second. Therefore, two Raid0 spindles are necessary, or four Raid0+1 spindles. This example was tested on a 4 x 450 megahertz (MHz) Exchange 2000 server with 4 gigabytes (GB) of RAM.
Keywords: kbpopimapnntp kbinfo KB317722
