Microsoft KB Archive/274076

Knowledge Base

Microsoft Reader: Text Is Displayed Upside Down

Article ID: 274076

Article Last Modified on 2/25/2003

---

APPLIES TO

• Microsoft Reader 1.5
• Microsoft Reader 2.0 for the Pocket PC

---

This article was previously published under Q274076

SYMPTOMS

When you use Microsoft Reader, the text may be displayed upside down.

CAUSE

This behavior can occur if either of the following conditions is true:

• Your Windows display settings are incorrect.
• The video driver for your video adapter is damaged or outdated.

RESOLUTION

To resolve this issue, use the following methods in the order in which they are presented.

Adjust the Microsoft Windows Display Settings

To adjust the Windows display settings, use the appropriate method for your version of Windows.

Microsoft Windows 95 or Microsoft Windows 98

1. Click Start, point to Settings, and then click Control Panel.
2. Double-click Display.
3. Click the Settings tab.
4. Move the Desktop Area or Screen Area slider to the 800 x 600 pixels setting.
5. In the Color Palette or Colors box, click High Color (16 bit).
6. Click OK.
7. If you are prompted to restart the computer, click Yes.

Microsoft Windows NT 4.0

1. Click Start, point to Settings, and then click Control Panel.
2. Double-click Display.
3. Click the Settings tab.
4. Move the Desktop Area slider to the 800 x 600 pixels setting.
5. In the Color Palette box, click 65536 colors, and then click Test.
6. Click OK, and then click Yes.
7. Click OK, and then close Control Panel.

If the issue continues to occur, proceed to the next method.

Obtain an Updated Video Driver

Contact the manufacturer of your video adapter for information about how to obtain and install the latest version of the video driver for your video adapter.

For information about how to contact your hardware manufacturer, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base:

65416 Hardware and Software Third-Party Vendor Contact List, A-K

60781 Hardware and Software Third-Party Vendor Contact List, L-P

60782 Hardware and Software Third-Party Vendor Contact List, Q-Z

If the issue continues to occur, proceed to the next method.

Adjust the ClearType Text Settings in Microsoft Reader

To adjust the ClearType text Settings in Microsoft Reader:

1. Start Microsoft Reader.
2. Click Guidebook at the bottom of the screen.
3. Click Quick Settings on the cover page.
4. Click Adjust ClearType.
5. Follow the instructions on the screen to adjust the ClearType text settings.

If the issue continues to occur, proceed to the next method.

Reduce the Graphics Hardware Acceleration

To reduce the graphics hardware acceleration:

1. Click Start, point to Settings, and then click Control Panel.
2. Double-click System.
3. On the Performance tab, click Graphics.
4. Move the Hardware acceleration slider until it is one notch to the right of None (the Basic acceleration setting).
5. Click OK, and then click Close.
6. When you are prompted to restart your computer, do so.
   If you are unable to restart your computer successfully:
   
   
   1. Press and hold down the CTRL key when you see the Starting Windows 98 message (in Microsoft Windows 98) or press F8 when you see the Starting Windows 95 message (in Microsoft Windows 95) on the screen.
   2. Select Safe Mode from the Startup menu.
   3. Repeat steps 1 through 6, but in step 4 move the Hardware Acceleration slider back to its original position.

Additional query words: 1.50 multi multi-media media mm msreader

Keywords: kbprb kbdisplay KB274076

---

Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.