Article ID: 272462
Article Last Modified on 10/29/2007
APPLIES TO
- Microsoft AutoRoute 2006
- Microsoft MapPoint 2006 Standard Edition
- Microsoft MapPoint 2004 Standard Edition
- Microsoft MapPoint 2002 Standard Edition
- Microsoft MapPoint 2001 Standard Edition
- Microsoft Streets & Trips 2008
- Microsoft Streets & Trips 2008 with Connected Services
- Microsoft Streets & Trips 2008 with GPS Locator
- Microsoft Streets & Trips 2006
- Microsoft Streets & Trips 2005 Standard Edition
- Microsoft Streets & Trips 2004 Standard Edition
- Microsoft Streets & Trips 2003 Standard Edition
- Microsoft Streets & Trips 2002 Standard Edition
- Microsoft Streets & Trips 2001 Standard Edition
This article was previously published under Q272462
SYMPTOMS
When you use the Find or Route Planning feature in any one of the programs listed in the "Applies to" section, you may receive the following error message:
CAUSE
This issue may occur if one of the following conditions is true:
- A real mode (16-bit) CD-ROM driver is installed on the computer.
- Microsoft Data Access Components (MDAC) are damaged or not installed correctly.
- The program CD is damaged or dirty.
RESOLUTION
To resolve this issue, use the following methods in the order that they are presented in.
Clean the CD
Clean the CD. To do this, use a CD cleaning kit, or gently wipe the silver side of the CD with a soft, lint-free cotton cloth. Do not use paper cloth. Paper cloth can scratch the plastic and leave streaks. When you clean the CD, wipe from the center of the disc outward. Do not use a circular motion.
If the issue continues to occur, clean the CD with a damp cloth or a commercial CD cleaning solution. Dry the CD thoroughly before you insert it into the CD drive. If the issue continues to occur, proceed to the next method.
Inspect the CD
Inspect the CD for visible deformation or scratches. If the disc is damaged, contact Microsoft Sales at (800) 360-7561 to obtain a replacement CD. You can also order it online at the following Microsoft Web site:
Note If the CD was provided with your computer, you need to contact your computer manufacturer to obtain a replacement CD.
For information about how to contact the manufacturer of the computer, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base:
65416 Hardware and software vendor contact information, A-K
60781 Hardware and software vendor contact information, L-P
60782 Hardware and software vendor contact information, Q-Z
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
If the issue continues to occur, go to the next method.
Make sure that you use a protected mode CD driver
To make sure that you use a protected mode (32-bit) CD driver for your CD drive, follow these steps:
- Click Start, point to Settings, and then click Control Panel.
- Double-click System.
- Click the Performance tab, and then confirm that the File System entry is 32-bit.
If the File System entry states Some drives are using MS-DOS compatibility, you may be using real mode (16-bit) CD drivers.
Contact the manufacturer of your CD drive to obtain an updated, protected mode (32-bit) CD-ROM driver for your CD drive.
- Click OK, and then close Control Panel.
For information about how to contact the manufacturer of the CD drive, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base:
65416 Hardware and software vendor contact information, A-K
60781 Hardware and software vendor contact information, L-P
60782 Hardware and software vendor contact information, Q-Z
If the issue continues to occur, go to the next method.
Download and install the MDAC 2.5 Update
To download and install the MDAC 2.5 Update, follow these steps:
- Visit the following Microsoft Web site:
- Scroll down the page until you see the following:
2.5 SP1 Release Microsoft Data Access Components 2.5 SP1 (2.51.5303.5) Now Available
- Click the Download MDAC 2.5 SP1 (2.51.5303.5) link.
- In the Keywords box, type mdac, under Show Results for, and then click All Downloads.
- Click Find It! in the list of found download files, click the following:
MDAC (Microsoft Data Access Components) 2.5 Update: Service Pack 1 (2.51.5303.5)
- Under Download Now, click the MDAC_TYP.EXE - 7,857 Kb link.
- Double-click the Mdac_typ.exe file on the Windows desktop.
- Follow the instructions that appear on the screen to install the MDAC 2.5 update.
- When you receive the prompt to restart the computer, do so.
If you experience problems when you install the MDAC 2.5 Update, restart the computer in Safe mode, and then repeat these steps.
To restart the computer in Safe mode, follow these steps:
- Press and hold down the CTRL key when you see the Starting Windows 98 message (in Microsoft Windows 98) or press F8 when you see the Starting Windows 95 message (in Microsoft Windows 95) on the screen.
- On the Startup menu, click Safe Mode.
MORE INFORMATION
Microsoft Windows XP and earlier versions
For more information about how to troubleshoot CD read errors, click the following article number to view the article in the Microsoft Knowledge Base:
218617 How to troubleshoot common problems that occur when a Windows 98-based or Windows Millennium Edition-based computer cannot read a CD or a DVD
Windows Vista
To resolve this issue, follow the steps in the appropriate section.
The computer is connected to the Internet
View the "Play a CD or DVD" topic on the following Windows Online Help and Support Web site:
The computer is not connected to the Internet
View the "Play a CD or DVD" topic in Windows Help and Support on the computer's hard disk by following these steps:
- Click Start, and then click Help and Support.
- In the Search Help box or in the Search online Help box, type Play a CD or DVD, and then click Search Help.
- In the list of topics, click Play a CD or DVD.
- Click the link that best describes the problem that you are experiencing.
- Follow the suggestions to troubleshoot the problem that you are experiencing.
Additional query words: mp2001 map point st2001 auto-map amap
Keywords: kbenv kberrmsg kbhardware kbprb KB272462
