Microsoft KB Archive/269041

Knowledge Base

Baseball 2001 Error Message: One or More of the Parameters Passed to the Function Are Incorrect

Article ID: 269041

Article Last Modified on 12/18/2006

---

APPLIES TO

• Microsoft Baseball 2001

---

This article was previously published under Q269041

Important This article contains information that shows you how to help lower security settings or how to turn off security features on a computer. You can make these changes to work around a specific problem. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this workaround in your particular environment. If you implement this workaround, take any appropriate additional steps to help protect your system.

SYMPTOMS

When you try to install Microsoft Baseball 2001, you may receive the following error message:

One or more of the parameters passed to the function are incorrect.

CAUSE

This behavior can occur if any of the following conditions are true:

• An antivirus program is running on your computer.
• An outdated video driver for your video adapter is installed on your computer.
• Your installation of Microsoft DirectX is damaged or outdated.

RESOLUTION

Important These steps may increase your security risk. These steps may also make your computer or your network more vulnerable to attack by malicious users or by malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed to, or to implement specific program capabilities. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you choose to implement this process, take any appropriate additional steps to help protect your system. We recommend that you use this process only if you really require this process.
Warning This workaround may make your computer or your network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
Note An antivirus program is designed to help protect your computer from viruses. You must not download or open files from sources that you do not trust, visit Web sites that you do not trust, or open e-mail attachments when your antivirus program is disabled.

For additional information about computer viruses, click the following article number to view the article in the Microsoft Knowledge Base:

129972 Computer viruses: description, prevention, and recovery

To resolve this issue, use the appropriate methods in the order that they appear in.

Quit Unnecessary Programs

Quit all unnecessary programs before you try to install the program. To do this, follow these steps:

1. Press CTRL+ALT+DELETE.
2. In the Close Program dialog box, click any program except Explorer or Systray, which are components of Microsoft Windows, and then click End Task.
   

If you are receive a message stating the program has stopped responding, click End Task again.

1. Repeat steps 1 and 2 to quit all programs except Explorer and Systray.
2. Disable any antivirus or disk tool programs that are installed on the computer. For information about how to disable these programs, see the printed or online documentation for the program.

If the issue continues to occur, go to the next method.

Clean Boot the Computer

Clean boot the computer to determine if the issue is caused by a program or a driver that starts automatically when you start the computer. To do this, use the appropriate method for your version of Microsoft Windows.

Microsoft Windows Millennium Edition (Me)

For additional information about how to perform a clean boot, click the article number below to view the article in the Microsoft Knowledge Base:

267288 How to Perform a Clean Boot in Windows Millennium Edition

Microsoft Windows 98

1. Click Start, click Run, type msconfig in the Open box, and then click OK.
2. Click Selective startup, and then click to clear the following check boxes:
   • Process Config.sys file
   • Process Autoexec.bat file
   • Process Winstart.bat file (if available)
   • Load startup group items
   Note If any of these check boxes are unavailable, the related file is empty or does not exist.
3. Click the Win.ini tab.
4. Expand Windows.
5. Click to clear the load= and the run= check boxes, and then click OK.
6. When you are prompted to restart the computer, do so.

Note To restore your original Startup options, click Normal Startup on the General tab in the System Configuration Utility tool.

For more information about how to clean boot a Windows 98-based computer, see the "Narrowing the Focus" section in the following article in the Microsoft Knowledge Base:

192926 How to Perform Clean-Boot Troubleshooting for Windows 98

Microsoft Windows 95

1. Restart the computer. When you see the "Starting Windows 95" message, press the F8 key, and then select Command Prompt Only from the Startup menu.
2. At the command prompt, type win, and then press ENTER. Press and hold down the SHIFT key until the Windows startup sequence is complete. This prevents any programs from being loaded automatically when Windows starts.
3. Disable any anti-virus or disk tool programs installed on the computer. For information about how to disable these programs, see the printed or online documentation for the program.
4. Quit all running programs except Explorer and Systray. To do this, see the "Quit Unnecessary Programs" method in this article.

For additional information about how to clean boot Windows 95, click the article number below to view the article in the Microsoft Knowledge Base:

177604 Multimedia: Troubleshooting Using Clean Boot of Windows 95

Obtain an Updated Video Driver for Your Video Adapter

Contact the manufacturer of your video adapter to inquire about how to obtain and install the latest version of the video driver for your video adapter.

To identify the manufacturer and the model of your video adapter:

1. Click Start, point to Settings, and then click Control Panel.
2. Double-click System.
3. On the Device Manager tab, expand Display adapters.
4. In the Display adapters branch, note the manufacturer and the model of your video adapter, and then click OK.
5. Close Control Panel.

For information about how to contact the manufacturer of your video adapter, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base:

65416 Hardware and software vendor contact information, A-K

60781 Hardware and software vendor contact information, L-P

60782 Hardware and software vendor contact information, Q-Z

Download and Install the Latest Version of DirectX in Safe Mode

Download and install the latest version of Microsoft DirectX from the following Microsoft Web site:

http://www.microsoft.com/windows/directx/default.mspx

Save the file to your desktop, and then install DirectX in Safe mode.

To restart your computer in Safe mode, use the appropriate method for your version of Microsoft Windows.

Microsoft Windows 98 or Microsoft Windows Millennium Edition (Me)

Restart your computer, press and hold down the CTRL key when your computer completes the Power On Self Test (POST), and then select Safe Mode from the Startup menu.

Microsoft Windows 95

Restart the computer. When you see the "Starting Windows 95" message, press the F8 key, and then select Safe Mode from the Startup menu.

To install DirectX, follow these steps:

1. When Windows starts in Safe mode, click OK.
2. Double-click the DirectX file that you saved to your desktop.
   

Note For DirectX 8.0, this file is named DX80eng.exe.

1. Follow the instructions that appear on the screen to install DirectX.
2. Restart your computer.

Additional query words: 1.00 msgame bb2001 bball norton anti virus nav mcafee

Keywords: kberrmsg kbprb kbsetup KB269041

---

Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.