Article ID: 241757
Article Last Modified on 10/26/2006
APPLIES TO
- Microsoft Exchange Server 5.5 Service Pack 3
This article was previously published under Q241757
SUMMARY
Microsoft Exchange Server Version 5.5
Service Pack 3
Information in this document is subject to change without notice and is
provided for informational purposes only. The entire risk of the use or
results of the use of this document remains with the user, and Microsoft
Corporation makes no warranties, either express or implied. Complying with
all applicable copyright laws is the responsibility of the user. No part of
this document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without the express written
permission of Microsoft Corporation.
Microsoft may have patents, patent applications, trademarks, copyrights, or
other intellectual property rights covering subject matter in this
document. Except as expressly provided in any written license agreement
from Microsoft, the furnishing of this document does not give you any
license to these patents, trademarks, copyrights, or other intellectual
property.
1999 Microsoft Corporation. All rights reserved.
Microsoft, MS-DOS, MS, Outlook, Windows, and Windows NT are either
registered trademarks or trademarks of Microsoft Corporation in the U.S.A.
and/or other countries.
Other product and company names mentioned herein may be the trademarks of
their respective owners.
MORE INFORMATION
---------------------------------------------------------------------
Installing the Service Pack 3 Update from the Compressed Files
---------------------------------------------------------------------
1. Create an SP3 directory on your local hard drive.
2. Download all of the compressed files in the ftp://ftp.microsoft.com/
bussys/exchange/exchange-public/fixes/<LANG>/Exchg 5.5/SP3/server
directory into the SP3 directory just created.
3. At the Windows NT command prompt, switch to the SP3 directory and type
the compressed file name to bring up the Self-extracting menu (Example:
SP3_550A.EXE).
4. At the Self-extracting menu, type the location of the SP3 folder in the
"Unzip to folder" box. Then select the "Unzip" button. Once the process
is completed select "OK," and then select "Close."
The following files are provided for Exchange Server 5.5 Service Pack 3:
Server update for Alpha SP3_550A.EXE
Server update for Intel SP3_550I.EXE
Chat server update for Alpha SP3_55CA.EXE
Chat server update for Intel SP3_55CI.EXE
Documentation SP3_55DC.EXE
HTML Form Converter SP3_55FO.EXE
Server support files (cluster,KMS,etc) SP3_55SS.EXE
Server support files for App Conn/Conv. SP3_55SC.EXE
Exchange Cal/Groupwise Conn. Inst.(Alpha) SP3_55GA.EXE
Exchange Cal/Groupwise Conn. Inst.(Intel) SP3_55GI.EXE
Exchange Notes/OVVM/SNADS Conn. Inst.(Alpha) SP3_55XA.EXE
Exchange Notes/OVVM/SNADS Conn. Inst.(Intel) SP3_55XI.EXE
Exchange Connector symbols for Alpha SP3S55XA.EXE
Exchange Connextor symbols for Intel SP3S55XI.EXE
Server symbols for Alpha SP3S550A.EXE
Server symbols for Intel SP3S550I.EXE
Chat server symbols for Alpha SP3S55CA.EXE
Chat server symbols for Intel SP3S55CI.EXE
Readme and HTML file SP3_55RE.EXE
5. Perform steps 3 and 4 for each file required.
All of the files listed may be necessary to use the Readme.htm file and to
access Service Pack 3 depending on which links are accessed. The Readme.rtf
and Readme.htm refer to these files in the SP3 directory as being located
in the CD-ROM drive.
For detailed information about Exchange Server 5.5 SP3, see the enclosed
server Readme in the file SP3_55RE.exe.
Note: All compressed files in the Server directory are intended to be
extracted on the I386 platform. Files for extraction on the Alpha platform
are available in the ftp://ftp.microsoft.com/bussys/exchange/
exchange-public/fixes/<LANG>/Exchg 5.5/SP3/server/Alpha directory.
-----------------------------------------------------------------
Installing the Service Pack 3 Windows 16-bit Client Update from
the Compressed File
-----------------------------------------------------------------
1. Create a directory with the following path: SP3\Support.
2. Download the compressed client file SP3_55WI.EXE into the SP3\Support
directory.
3. At the Windows NT command prompt, switch to the SP3\Support directory,
and type the file name followed by a -d:
Example: SP3_55WI -d
4. Switch to the SP3\Support\WIN16 directory, and then type setup.
---------------------------------------------------------------------
Installing Service Pack 3 for the Microsoft Exchange Macintosh Client
from the Compressed File
---------------------------------------------------------------------
If you are currently using a Macintosh:
Note: The information in step 1 has been updated from the original
Readme file.
1. Download the file "macout82.hqx" or the file "macout82.bin" from the
Microsoft ftp site at ftp://ftp.microsoft.com/bussys/exchange/
exchange-public/fixes/<LANG>/exchg5.5/sp3/mac/. (If you do
not know which file to choose, download "macout82.hqx".)
2. Use a utility to decompress and unstuff the downloaded file as
necessary.
3. Open the folder "Microsoft Outlook 8.2" that was created on the desktop.
4. Double-click "Microsoft Outlook Setup" to begin the installation.
If you are currently not using a Macintosh:
1. Download and run the file "macout82.exe".
2. Locate the file "macout82.hqx" that was extracted by this program.
3. Copy this extracted file to a Macintosh.
4. Using a BinHex-capable decompression program, decompress this file to
the Macintosh desktop.
5. If necessary, double-click the file "Microsoft Outlook 8.2.sit" to
unstuff the installation files.
6. Open the folder "Microsoft Outlook 8.2" that was created on the desktop.
7. Double-click "Microsoft Outlook Setup" to begin the installation.
Macintosh Client System Requirements
Minimum: Apple Macintosh with a 68030 or faster processor, System 7.5.5 or
later, and at least 16 megabytes (MB) of RAM.
Recommended: Apple Power Macintosh with Mac OS 8.0 or later and at least 16
MB of RAM. In addition, Outlook will run faster if virtual memory is
enabled and set to a minimum of 1 MB above the installed physical memory.
For more information about Microsoft Outlook 8.2 for Macintosh, including
information about new features, read the Release Notes from your Microsoft
Outlook 8.2 installation folder.
-----------------------------------------------------------------------
Installing Service Pack 3 for Microsoft Exchange Client Support Files
from the Compressed File
-----------------------------------------------------------------------
1. Create a directory with the following path: SP3\Support.
2. Download the client support file SP3_55SU.exe from
ftp://ftp.microsoft.com/bussys/exchange/exchange-public/fixes/<LANG>/
Exchg5.5/SP3/client directory into the SP3\Support directory.
3. At the Windows NT command prompt, switch to the SP3\Support directory,
and type the file name to bring up the Self-extracting menu.(Example:
SP3_55SU.EXE) From the menu, select the folder in which to unzip the
files.
The client support file includes the following directories under the
SP3\<LANG>\Support directory:
- The Language pack. Located in the SP3\Support\Langpack\<LANG>\Nta and
SP3\Support\Langpack\<LANG>\Ntx directory.
- The Schedule+ Exchange Transport DLL installation program. Located in
the SP3\Support\Msoutl\<LANG>\Win16 and SP3\Support\Msoutl\<LANG>\Win32
directory. This driver enables you to open Microsoft Outlook calendars
from within Schedule+ 7.x. It works only with Windows NT or Windows 95
versions of Schedule+ 7.x. You must also be using Microsoft Exchange
Server.
- The Templates are located in the SP3\Support\Template\<LANG>\Alpha and
SP3\Support\Template\<LANG>\I386 directories.
--------------------------------------------------------------------
Installing Service Pack 3 Server Update from the Compressed Files
--------------------------------------------------------------------
1. Make a complete backup of your Microsoft Exchange Server computer.
Verify that it is done.
2. Create an SP3 directory.
3. Download the compressed Setup file appropriate for your hardware
platform into the SP3 directory.
Select one of these files as appropriate:
Alpha AXP SP3_550A.EXE
Intel SP3_550I.EXE
4. Download the compressed Support file appropriate for your hardware
platform into the SP3 directory.
Select one of these files as appropriate:
Alpha AXP SP3S550A.EXE
Intel SP3S550I.EXE
5. At the Windows NT command prompt, switch to the SP3 directory, and type
the compressed file name(Example: SP3_550A.EXE) to bring up the
Self-extracting menu. From the menu, select the folder in which to unzip
the files.
6. Switch to the SP3\ENG\Server\Setup\I386 or SP3\ENG\Server\Setup\Alpha
directory (depending on whether you have an Intel or Alpha AXP
processor).
7. Type "Update", and then follow the instructions displayed on the screen.
Keywords: kbinfo KB241757
