Article ID: 239929
Article Last Modified on 10/31/2006
APPLIES TO
- Microsoft Windows NT Server 4.0, Terminal Server Edition
- Microsoft Windows NT Server 4.0 Standard Edition, when used with:
- the hardware: DEC Alpha
- Microsoft Windows NT Workstation 4.0 Developer Edition, when used with:
- the hardware: DEC Alpha
- Microsoft Windows NT Server 4.0 Enterprise Edition, when used with:
- the hardware: DEC Alpha
This article was previously published under Q239929
SUMMARY
Updated hardware abstraction layers (HAL) have been released by Compaq to enhance compatibility for Windows NT 4.0 on Compaq/DIGITAL Alpha-based hardware platforms. The following changes have been made to Windows NT 4.0 Service Pack 6 to support the new Alpha HALs released by Compaq:
- Enable Galaxy Field Replaceable Unit (FRU) 5.0 support for Tsunami chip set platforms.
- Add Tsunami chip set Hardware Access List to Windows NT 4.0.
- Enable TL to issue an IPL17 when needed.
- Fix debug target's hangs when baud rates are mismatched.
- Add support for System Management BIOS (SMBIOS) 2.1.
- Add file to allow SX to build without warnings.
- Add support to write to FRU EEPROM for Clipper platforms.
- Add required serviceability changes.
- Fix 16-bit sound card distortion.
- Enable Remove command to use only the common header file.
- Disable/enable system interrupt.
- PALs have been updated to fix a problem where stopping a service traps with KiPanicException on Alpha. This is fixed by making the PAL not attempt to SYSRET in priviledged PAL mode. The process can still stop, but not take the system with it.
The updated HALs include the Revision G HAL released by Compaq.
RESOLUTION
Windows NT Server or Workstation 4.0
To resolve this problem, obtain the latest service pack for Windows NT 4.0 or the individual software update. For information on obtaining the latest service pack, please go to:
- 152734how to obtain the latest windows nt 4.0 service pack
For information on obtaining the individual software update, contact Microsoft Product Support Services. For a complete list of Microsoft Product Support Services phone numbers and information on support costs, please go to the following address on the World Wide Web:
Windows NT Server 4.0, Terminal Server Edition
To resolve this problem, obtain the latest service pack for Windows NT Server 4.0, Terminal Server Edition. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
152734 How to Obtain the Latest Windows NT 4.0 Service Pack
STATUS
Microsoft has confirmed that this is a problem in Windows NT 4.0 and Windows NT Server 4.0, Terminal Server Edition.
This problem was first corrected in Windows NT Server 4.0 Service Pack 6 and Windows NT Server 4.0, Terminal Server Edition Service Pack 6.
MORE INFORMATION
The Windows NT Hardware Abstraction Layer (HAL) interfaces directly between the operating system and the computer hardware. Although the operating system code remains the same from platform to platform, a HAL must be designed for each type of computer hardware.
For information about the Basic Input/Output System (BIOS) and HAL on your computer, click Start, point to Programs, point to Administrative Tools, click Windows NT Diagnostics, and then click the System tab.
For more information about the HALs released by Compaq, please visit the following Compaq Web site:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Keywords: kb3rdparty kbhardware kbinfo KB239929
