Microsoft KB Archive/223450

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 16:03, 18 July 2020 by 3155ffGd (talk | contribs) (importing KB archive)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Article ID: 223450

Article Last Modified on 11/1/2006


  • Microsoft Windows NT Server 4.0, Terminal Server Edition
  • Microsoft Windows NT Workstation 4.0 Developer Edition
  • Microsoft Windows NT Server 4.0 Standard Edition

This article was previously published under Q223450

IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:

256986 Description of the Microsoft Windows Registry


When you establish TCP connections between computers across high-delay networks, connection requests and data may be retransmitted unnecessarily. This can result in extra congestion and slow response.


The initial TCP retransmission timer was hard-coded to three seconds.


Windows NT Server or Workstation 4.0

To resolve this problem, obtain the latest service pack for Windows NT 4.0 or the individual software update. For information on obtaining the latest service pack, please go to:

  • 152734 how to obtain the latest windows nt 4.0 service pack

For information on obtaining the individual software update, contact Microsoft Product Support Services. For a complete list of Microsoft Product Support Services phone numbers and information on support costs, please go to the following address on the World Wide Web:

WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

A new registry parameter has been added to TCP to allow the initial retransmission timer to be adjusted. This parameter may be useful for high-delay networks, where the round-trip time often exceeds three seconds.

This parameter controls the retransmission time-out of the initial TCP connection request (SYN) and of the first data sent on a connection. It is a global value, which applies to all interfaces in the computer.

To adjust the InitialRtt parameter, perform the following steps:

  1. Start Registry Editor (Regedt32.exe).
  2. Locate the following key in the registry:


  3. On the Edit menu, click Add Value, and then add the following registry value:

    Value Name: InitialRtt
    Data Type: REG_DWORD
    Value: 5000 decimal (for example, to set it to 5 seconds)
    Valid Range: 0-65535 (decimal)
    Default: 0xBB8 (3000 decimal)
    Description: This parameter controls the initial retransmission timeout used by TCP on each new connection. It applies to the connection request (SYN) and to the first data segment(s) sent on each connection.

  4. Quit Registry Editor.
  5. Restart the computer.

Windows NT Server 4.0, Terminal Server Edition

To resolve this problem, obtain the latest service pack for Windows NT Server 4.0, Terminal Server Edition. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:

152734 How to Obtain the Latest Windows NT 4.0 Service Pack


Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article. This problem was first corrected in Windows NT Server version 4.0, Terminal Server Edition Service Pack 6.


Care should be used when adjusting this value. Setting it to large values will dramatically increase the amount of time that it takes for a TCP connection attempt to fail, if the target IP address does not exist.

For instance, the default value is 3,000, or 3 seconds. By default, a connection request is retried 2 times. The total time-out is (3+6+12) seconds, or 21 seconds.

If this registry value is set to 6,000 (6 seconds), the total timeout will be (6+12+24) seconds, or 42 seconds. During this time, an application can appear to stop responding (hang).

Additional query words: 4.00

Keywords: kbhotfixserver kbqfe kbbug kbfix kbqfe KB223450