Microsoft KB Archive/185786

From BetaArchive Wiki
Knowledge Base


Article ID: 185786

Article Last Modified on 2/23/2007



APPLIES TO

  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows NT Server 4.0 Standard Edition



This article was previously published under Q185786


SUMMARY

This article discusses the recommended practices for implementing the Windows Internet Name Service (WINS). Following these practices should decrease the occurrence of WINS problems.

MORE INFORMATION

  • It is highly recommended that a WINS server point to itself as primary and secondary WINS in the TCP/IP configuration.For additional information, click the article number below to view the article in the Microsoft Knowledge Base:

    150737 Setting Primary and Secondary WINS Server Options

  • It is highly recommended to use the correct ratio of WINS servers to WINS clients. A general rule is to have one WINS server for each 10,000 users plus one additional WINS server for redundancy. The redundant server does not have to be located at the same site.

    For additional information on WINS Ratios, please see the following White Paper available on the Microsoft anonymous ftp server:

    File Name: Winswp.doc
    Location : ftp://ftp.microsoft.com/bussys/winnt/winnt-docs/papers/
    Title : "Windows Internet Naming Service (WINS)" (Page 44)

  • It is highly recommended to use a hub and spoke replication model.For additional information, click the article number below to view the article in the Microsoft Knowledge Base:

    168076 WINS Fails to Converge

    -and-

    Page 24 of the WINS White Paper mentioned earlier.
  • It is highly recommended to periodically run Jetpack (for example, once a month or once a quarter).For additional information, click the article numbers below to view the articles in the Microsoft Knowledge Base:

    167812 WINS and DHCP Dynamic Database Compaction in Windows NT 4.0

    145881 How to use Jetpack.exe To Compact a WINS or DHCP Database

  • Multihomed WINS servers require additional configuration in order for replication to occur.For additional information about how to configure multihomed WINS servers, click the article number below to view the article in the Microsoft Knowledge Base:

    139380 Multihomed WINS Server Replication Partner Failures

  • It is highly recommended to not use static entries for WINS clients.

For additional information, click the article number below to view the article in the Microsoft Knowledge Base:

177140 How to Remove Static WINS Entries from All WINS Servers


REFERENCES

For additional information, click the article numbers below to view the articles in the Microsoft Knowledge Base:

135844 WINS Manager Shows WINS Servers That are Not Present


137423 How to Reregister Services in WINS


139608 SMB Traffic During Windows NT Domain Logon


168712 How to Manually Recreate a WINS Database


127897 WINSADMN Database Active Column Symbol Descriptions


139410 Error Message: There are Currently No Logon Servers Available...


135405 Repairing a Corrupted WINS Database with Starting Version Count.



Additional query words: best kbDSupport

Keywords: kbinfo KB185786