Article ID: 184214
Article Last Modified on 1/22/2007
APPLIES TO
- Microsoft Windows 98 Standard Edition
This article was previously published under Q184214
SYMPTOMS
When you attempt to convert a drive to the file allocation table 32 (Fat32) file system from a command prompt, you may receive the following error message:
CAUSE
This issue may occur if you attempt to run the conversion file Cvt.exe from a command prompt without using the /cvt32 parameter.
RESOLUTION
To resolve this issue, add the /cvt32 parameter to the Cvt.exe command and then run the conversion. For example, type the following command at the command prompt, and then press ENTER
cvt <drive>: /cvt32
where <drive> is the drive you want to convert.
STATUS
This feature is by design.
MORE INFORMATION
The /cvt32 parameter is designed to keep you from accidentally running the converter. Note that without this parameter, the utility does not run.
The /win parameter can be used to run the converter in an MS-DOS window (also known as a virtual machine, or VM) in Windows98. Note that this only works if the specified volume has no open files. If the converter cannot prevent all possible file accesses by other system components and programs during the conversion, the conversion is cancelled.
For additional information about using the FAT32 converter, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: 180134
TITLE : How to Convert a Drive to FAT32 Using Drive Converter
Additional query words: 98
Keywords: kberrmsg kbprb KB184214
