Unable to PING Target on the Same Segment with Correctly Configured TCP/IP Settings |
Q180062
The information in this article applies to:
- Microsoft Windows NT Advanced Server, version 3.1
- Microsoft Windows NT Workstation versions 3.5, 3.51, 4.0
- Microsoft Windows NT Server versions 3.5, 3.51, 4.0
- Microsoft Windows for Workgroups version 3.11
- Microsoft TCP/IP-32 for Windows for Workgroups, versions 3.11, 3.11a, 3.11b
- Microsoft Windows 95
- Microsoft Network Client for MS-DOS version 3.0
SYMPTOMS
When you attempt to use the Ping utility to test connectivity between two computers that are on the same network segment, you may receive the following error message:
Request timed out.
You may receive the above error even though all of the computers on this network segment are configured with proper IP addresses and subnet masks. All other computers may work correctly and the problem computer may be able to lease address information from a Dynamic Host Configuration Protocol (DHCP) server correctly.
CAUSE
The network interface card (NIC) that is installed in this computer is corrupting Internet Control Messaging Protocol (ICMP) packets. A network trace would show that ICMP packets from this computer arrive corrupt at the other computers. The CHECKSUM field in the ICMP header would look similar to the following:
ICMP: Checksum = ERROR: CheckSum is 0x4B5C, Should be 0x8B5C
RESOLUTION
To resolve this issue, you will need to replace the defective NIC.
Additional query words:
Keywords : kbnetwork
Issue type : kbprb
Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT351xsearch kbWinNT350xsearch kbWinNT400xsearch kbWinNTW350 kbWinNTW350xsearch kbWinNTW351xsearch kbWinNTW351 kbWinNTSsearch kbWinNTS400xsearch kbWinNTS400 kbWinNTS351 kbWinNTS350 kbWinNTAdvSerSearch kbWinNTAdvServ310 kbWinNTS351xsearch kbWinNTS350xsearch
Last Reviewed: December 14, 2000 |
