Article ID: 173250
Article Last Modified on 1/20/2007
APPLIES TO
- MSPRESS Microsoft Windows NT Server 4.0 Resource Kit ISBN 1-57231-344-7
- MSPRESS Microsoft Windows NT Workstation 4.0 Resource Kit ISBN 1-57231-343-9
- MSPRESS Microsoft Windows NT Server 4.0 Resource Kit, Supplement One ISBN 1-57231-559-8
- MSPRESS Microsoft Windows NT Server 4.0 Resource Kit, Supplement Two ISBN 1-57231-626-8
This article was previously published under Q173250
SYMPTOMS
When opening RKTools.hlp or one of the other help files included on the Resource Kit CD-ROM, you may receive the following error message:
After clicking OK, you will then receive the following error message:
CAUSE
The Microsoft Windows NT 4.0 help files require Winhlp32.exe to be installed and associated with .hlp files. If Winhlp32.exe is missing, or if Winhelp.exe is installed in place of Winhlp32.exe, the errors listed above will occur.
RESOLUTION
Make Sure Winhlp32.Exe Is Installed
- Click the Start button, click Find, and then click Files or Folders.
- Type Winhlp32.exe in the Named input box, and then click Find Now.
Install Winhlp32.exe
If Winhlp32.exe is not present, use the following steps to copy Winhlp32.exe to your system folder.
- Insert the Microsoft Windows NT Server or Workstation 4.0 CD-ROM into your CD-ROM drive. - or -
Map a network drive to the location of your original Microsoft Windows NT Server or Workstation 4.0 files. - Change to the folder that matches your platform (\I386 for Intel-based computers).
- Copy the following files into a temporary folder on your hard disk:
Winhlp32.cn_
Winhlp32.ex_
Winhlp32.hl_
- Click Start, point to Programs, and then click Command Prompt.
- Change to the temporary folder where you stored the Winhlp32 files.
- Type the following commands:
EXPAND WINHLP32.CN_ WINHLP32.CNT EXPAND WINHLP32.EX_ WINHLP32.EXE EXPAND WINHLP32.HL_ WINHLP32.HLP
- Copy Winhlp32.cnt, Winhlp32.exe, and Winhlp32.hlp to your \%SYSTEMROOT%\ folder. Typically this folder is C:\WINNT.
- Delete the contents of your temporary folder.
Check and Update the Association for Help Files
Use the following steps to check and update the association for help files:
- Click the Start button, click Programs, and then click Windows NT Explorer.
- Click the View menu, and then click Options.
- Click the File Types tab.
- Scroll through the list of file types until you locate the Help File registered file type, and then click Edit.
- Double-click the Open action. The default value for the "Application used to perform this action" field should be:
C:\WINNT\system32\winhlp32.exe
This is the default installation folder if you have installed Windows NT to another folder use the path to that folder.
If this field references Winhelp.exe instead of Winhlp32.exe, update the field and then click OK.
- Click Close, and then click Close again to update the file association.
Additional query words: mspress ms_press press ntrk ntreskit 1-57231-344-7 1-57231-343-9 1-57231-559-8 1-57231-626-8
Keywords: kbhowto kbprb KB173250