Article ID: 158336
Article Last Modified on 10/27/2006
APPLIES TO
- Microsoft Exchange Server 4.0 Standard Edition
- Microsoft Exchange Server 5.0 Standard Edition
- Microsoft Exchange Server 5.5 Standard Edition
This article was previously published under Q158336
SUMMARY
When you create a new mailbox in Microsoft Exchange Server, the following error messages may be displayed if the file version for the proxy address generators are not correctly specified in the directory:
The following events are logged in the Windows NT application event log:
MORE INFORMATION
These error messages are displayed when the directory version of the proxy generators does not match the actual dynamic link library (DLL) file version.
To verify that the appropriate proxy DLL is used:
- Verify the build version that you use. To do this, look at the properties on:
organization\site\Configuration\Server \server name
- Verify the file version for the proxy DLL. To do this, look at the properties on:
The information there must match the information in the table at the end of this article. If this information does not match, either obtain the correct file from the source compact disc, or modify the directory version to match the file versions.
organization\site\Configuration\Addressing\"E- mail address generators"\proxy address generator object
You can use the following information when you restore different versions of the Inproxy.dll, Pcproxy.dll, and X400prox.dll files.
You must verify that the actual file versions on the hard disk drive are the ones that were supplied with the respective build number. For example, if you have Microsoft Exchange Server version 4.0 Service Pack 2 installed, the proxy DLL files supplied with Service Pack 2 must be in place. You can obtain these files from the original compact discs; copy them to the computer running Microsoft Exchange Server. The default location on the hard disk drive is:
drive:\Exchsrvr\Address\address type\processor type\proxy generator file.dll
To change the current version, you must run the Microsoft Exchange Server Administrator program in raw mode as follows:
WARNING: If you use the raw mode of the Exchange Server Administrator program (admin /r) incorrectly, serious problems may occur that may require you to reinstall Microsoft Windows NT Server, Microsoft Exchange Server, or both. Microsoft cannot guarantee that problems that result from using raw mode incorrectly can be solved. Use raw mode at your own risk.
- Start the Microsoft Exchange Server Administrator program in raw mode by typing the following at an MS-DOS command prompt:
c:\exchsrvr\bin\admin /r
- Go to the following location:
Look for the existing address generator objects in the right pane of the window.
Organization\Site\Configuration\Addressing\"E-mail address generators"
- Select Internet E-mail Address Generator for i386.
- On the File menu, click Raw Properties. (Repeat this step for all proxy generators.)
In the left pane of the window a list of existing object attributes is displayed. Find File-Version, and compare the existing value with the values in the following table.
NOTE: If you cannot find File-Version you may have to change "List attributes of type:" to All.Server Build File Name and Admin Version Raw File-Version Exchange 837.10 Inproxy.dll - 4.0.837.3 0300450300000400 (RTM) Pcproxy.dll - 4.0.837.10 0A00450300000400 X400prox.dll - 4.0.837.10 0A00450300000400 Exchange 838.15 Inproxy.dll - 4.0.838.15 0300450300000400 (SP1) Pcproxy.dll - 4.0.838.15 0A00450300000400 X400prox.dll - 4.0.838.15 0A00450300000400 Exchange 993.4 Inproxy.dll - 4.0.993.5 0500E10300000400 (SP2) Pcproxy.dll - 4.0.993.4 0400E10300000400 X400prox.dll - 4.0.993.4 0400E10300000400 Exchange 994.64 Inproxy.dll - 4.0.994.63 3F00E20300000400 (SP3) Pcproxy.dll - 4.0.993.4 0400E10300000400 X400prox.dll - 4.0.993.4 0400E10300000400 Exchange 995.54 Inproxy.dll - 4.0.995.52 3400E30300000400 (SP4) Pcproxy.dll - 4.0.993.4 0400E10300000400 X400prox.dll - 4.0.993.4 0400E10300000400 Exchange 996.72 Inproxy.dll - 4.0.996.62 3E00E40300000400 Pcproxy.dll - 4.0.996.72 4800E40300000400 X400prox.dll - 4.0.996.62 4800E40300000400 Exchange 1457.11 Inproxy.dll - 5.0.1457.3 0300B10500000500 (RTM) Pcproxy.dll - 5.0.1457.3 0300B10500000500 X400prox.dll - 5.0.1457.3 0300B10500000500 Exchange 1458.48 Inproxy.dll - 5.0.1457.3 0300B10500000500 (SP1) Pcproxy.dll - 5.0.1457.3 0300B10500000500 X400prox.dll - 5.0.1457.3 0300B10500000500 Exchange 1460.8 Inproxy.dll - 5.0.1460.8 0800B40500000500 (SP2) Pcproxy.dll - 5.0.1460.8 0800B40500000500 X400prox.dll - 5.0.1460.8 0800B40500000500 Exchange 1960.5 Inproxy.dll - 5.5.1960.5 0500A80705000500 (RTM) Pcproxy.dll - 5.5.1960.5 0500A80705000500 X400prox.dll - 5.5.1960.5 0500A80705000500 Exchange 2232.18 Inproxy.dll - 5.5.1960.5 0500A80705000500 (SP1) Pcproxy.dll - 5.5.1960.5 0500A80705000500 X400prox.dll - 5.5.1960.5 0500A80705000500 Exchange 2448.8 Inproxy.dll - 5.5.2448.8 0800900905000500 (SP2) Pcproxy.dll - 5.5.2448.8 0800900905000500 X400prox.dll - 5.5.2448.8 0800900905000500 Exchange 2650.24 Inproxy.dll - 5.5.2650.24 18005A0A05000500 (SP3) Pcproxy.dll - 5.5.2650.24 18005A0A05000500 X400prox.dll - 5.5.2650.24 18005A0A05000500 Exchange 2653.23 Inproxy.dll - 5.5.2653.23 17005D0A05000500 (SP4) Pcproxy.dll - 5.5.2653.23 17005D0A05000500 X400prox.dll - 5.5.2653.23 17005D0A05000500 NOTE: No changes were made in Exchange Server Service Pack 1- Change the current File-Version value if the Raw File-Version value does not correspond to the Exchange Server build number as indicated in the table. There is no need to restart either the services or the Exchange Server Administrator program.
- Verify that the File-Version value has changed.
NOTE: Any special fixes or updates that you have obtained from Microsoft change the file and build version numbers and may not match the table above. Always follow the instructions included with the fix.
Additional query words: 4.00 IMCADMIN.DLL 5.00 extension SMTP Internet mail connector inproxy dll pcproxy x400prox conadmin
Keywords: kbprb KB158336
