Article ID: 156425
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Workstation 4.0 Developer Edition
- Microsoft Windows NT Server 4.0 Standard Edition
This article was previously published under Q156425
SUMMARY
As with Windows NT 3.x, an LMHOSTS file can be imported during installation to enable a computer running Windows NT Workstation 4.0 or Windows NT Server 4.0 to join a domain across a router when WINS is not available to facilitate name resolution. The TCP/IP configuration options presented during setup depend on whether DHCP client support is selected on the client.
MORE INFORMATION
If the TCP/IP protocol is selected in the "Installing Windows NT Networking" phase of Windows NT Setup, the user is prompted with the question:
If there is a DHCP server on your network, TCP/IP can be configured to dynamically provide an IP address. If you are not sure, ask your System Administrator. Do you wish to use DHCP? Yes/No.
If the YES option is selected, the TCP/IP configuration dialog is bypassed, along with the ability to configure the following:
- Import an LMHOSTS file.
For more information, see the following articles in the Microsoft Knowledge base: - Manually specify WINS server address (useful if you want multiple domain controllers to register with the same WINS server).
- Enable TCP/IP routing.
- Define DNS address and domain name.
The TCP/IP configuration information can be configured with DHCP enabled by clicking the "Back" button two times from the following dialogue box:
Windows NT is now ready to start the network so that you can complete the installation of networking. Click Next to start the network. Click Back to stop the network if it is running.
Click the Back button two times to go back to the TCP/IP Properties screen. Here, you can choose to import the LMHOSTS file.
Unlike previous versions of Windows NT, the LMHOSTS file can be accessed from any locally available device (floppy disk drive, hard disk drive, CD-ROM drive) during setup instead of the root directory of a:\.
NOTE: After the LMHOSTS file has been imported and networking has been initialized, it cannot be reimported. Even though it is possible to back up and tell the installation process to reimport LMHOSTS, it will not be written to the cache. If the wrong LMHOSTS file is imported (for whatever reason) the installation will have to be restarted from the very beginning. There is also no way to remotely purge and reload the cache.
Keywords: kbinfo kbsetup KB156425
