Article ID: 142050
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Workstation 4.0 Developer Edition
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
- Microsoft Windows NT Server 4.0 Standard Edition
This article was previously published under Q142050
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 Description of the Microsoft Windows Registry
SUMMARY
This article explains how to use multiple IP addresses and multiple Internet domain names on a stand-alone Windows NT computer to dial to the Internet using Remote Access Service (RAS).
MORE INFORMATION
Your ISP may assign multiple IP addresses for different domain names on the Domain Name System (DNS) server. This allows a single Web server to service multiple companies (appears as multiple Web servers).
WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
To configure RAS to use these IP addreses, do the following:
- Use the first IP address for the RAS connection.
- Start the Remote Access client.
- Select the phonebook entry you want to modify and click Edit.
- Click Advanced. If the Advanced button is not available, proceed to the next step.
- Click Network.
- In the Network Protocol Settings dialog box, click TCP/IP Settings.
- Select Require specific IP address and enter the IP address.
- Quit the Remote Access client.
- Use the other IP addresses for your network adapter.
NOTE: If you do not have a network adapter, install the MS Loopback Adapter. To do this, click Add Adapter in Control Panel Network.- In the TCP/IP Configuration dialog box, add the next available IP address and the subnet mask.
- Click Advanced to add the remaining IP addresses and corresponding subnet masks.
NOTE: The RAS connection and the MS Loopback Adapter can use the same subnet mask.
- Start Registry Editor (REGEDT32.EXE) and locate the following Registry subkey in the HKEY_LOCAL_MACHINE subtree:
\SYSTEM\CurrentControlSet\Service\RasArp\Paramete - From the Edit menu, select Add Value.
- Enter the following:
Value Name: DisableOtherSrcPackets
Data Type: REG_DWORD
Data: 0 - Choose OK and quit the Registry Editor.
- Shut down and restart Windows NT.
Additional query words: prodnt logical
Keywords: kbnetwork KB142050
