Article ID: 140375
Article Last Modified on 2/20/2007
APPLIES TO
- Microsoft Windows 2000 Server
- Microsoft Windows 2000 Advanced Server
- Microsoft Windows 2000 Professional Edition
- Microsoft Windows 2000 Datacenter Server
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Workstation 4.0 Developer Edition
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
- Microsoft Windows NT Server 4.0 Standard Edition
- Microsoft TCP/IP-32 for Windows for Workgroups 1.0
- Microsoft Windows 95
This article was previously published under Q140375
For a Microsoft Windows XP version of this article, see 314496.
SUMMARY
MTU (Maximum Transfer Unit) specifies the maximum transmission unit size of an interface. Each interface used by TCP/IP may have a different MTU value specified. The MTU is usually determined through negotiation with the lower driver, using that lower driver value. However, that value may be overridden.
MORE INFORMATION
Each media type has a maximum frame size that cannot be exceeded. The link layer is responsible for discovering this MTU and reporting it to the protocols above. NDIS drivers may be queried for the local MTU by the protocol stack. Knowledge of the MTU for an interface is used by upper layer protocols such as TCP, which optimizes packet sizes for each medium automatically.
If a network interface card (NIC) driver such as an ATM driver uses LAN emulation mode, it may report that it has an MTU higher than what is expected for that media type. For instance, it may emulate Ethernet but report an MTU of 9180 bytes. Windows accepts and uses the MTU size reported by the adapter even when it exceeds the normal MTU for a given media type.
Below is a list of Default MTU size for different media.
Network MTU(Bytes) ----------------------------------- 16 Mbit/Sec Token Ring 17914 4 Mbits/Sec Token Ring 4464 FDDI 4352 Ethernet 1500 IEEE 802.3/802.2 1492 X.25 576
Additional query words: prodnt wfw win95x
Keywords: kbinfo kbnetwork KB140375