Knowledge Base

WD97: Error Message: "Disk Is Full..." or "ScanDisk Cannot Check the Drive..."

Article ID: 137918

Article Last Modified on 8/17/2007

APPLIES TO

Microsoft Word 97 Standard Edition

This article was previously published under Q137918

SYMPTOMS

When you save a document, an error message similar to the following may appear if you run Word under Windows 95:

The disk is full or too many files are open. (C:\WINWORD\DOC1.DOC)

A similar error message may occur when Word performs an AutoSave operation:

The disk is full or too many files are open. (C:\WINWORD\~WRANNNN.ASD)

Also, when you try to run ScanDisk on Windows 95, you may receive the following error message:

ScanDisk cannot check the drive as it is not properly formatted or a utility has locked it, format the hard disk or wait for the utility to finish and re-run ScanDisk.

If you save your document as Rich Text Format (RTF), the following error message may appear:

Word is unable to write some or all of the embedded objects due to insufficient memory or disk space.

CAUSE

This problem may occur for either of the following reasons:

You are running the Bgmail.exe utility.

-or-
The document contains corrupted or invalid links.

WORKAROUND

If You Are Using Bgmail.exe

Bgmail.exe is a tool installed on AT&T computers to provide access to AT&T proprietary mail services.

Bgmail.exe prevents Windows 95 tools from locking the hard disk properly. Note that Bgmail.exe is loaded from either the Winstart.bat file or the Autoexec.bat file.

If you are running the Bgmail utility, edit the Winstart.bat file or the Autoexec.bat file, and place a semicolon (;) at the beginning of the Bgmail.exe line to temporarily turn it off. Save and close the file, and then restart Windows 95 and run ScanDisk.

134456 Err Msg: ScanDisk Cannot Check This Drive Now Because the...

The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

The Document Contains Corrupted or Invalid Links

This problem is known to occur with Microsoft Equation Editor objects. However, this problem can also occur with corrupt or invalid links of other object types as well.

Equation Editor, a special version of the MathType equation editor from Design Science, Inc., is customized for use with Microsoft applications. For more information about MathType, please visit the following MathType Web address:

http://www.mathtype.com/

Using Equation Editor, you can build complex equations by picking symbols from a toolbar and typing variables and numbers. As you build an equation, Equation Editor automatically adjusts font sizes, spacing, and formatting in keeping with mathematical typesetting conventions. You can also adjust formatting as you work and redefine the automatic styles.

Use one of the following methods to work around this problem:

Method 1: Save Your Word Document as Rich Text Format

On the File menu, click Save As.
In the Save As dialog box, change the Save as type box to Rich Text Format.

NOTE: You may also want to change the File name box to a new name for your document to prevent accidentally overwriting your original document.

Click Save.
On the File menu, click Close.
On the File menu, click Open, and then open the Rich Text Format file that you saved in steps 1 through 3.

NOTE: In the Open dialog box, you may need to change the Files of type box to Rich Text Format before you can see you new file. If the Convert File dialog box appears, make sure that Rich Text Format (RTF) is selected, and then click OK.

After the Rich Text Format document is open, click Save As on the File menu, and resave your new document as a Word Document with a new file name.

NOTE: It is recommended that you not save your new Word document back to the original file name. Instead, save your new Word document by using a new file name. If the problem with the document has been corrected, you can delete the problem document (the original Word document) and rename your new Word document to the original file name later.

Method 2: Test for Invalid Object Links

To test for invalid object links in your Word document, you need to update the fields in Word. To do this, follow these steps:

On the Edit menu, click Select All.
Press F9.

Word should display the following message on the status bar when it is updating fields:

Word is updating the fields in the document

If an error message appears at this point, one or more of the fields may be invalid and may show a message similar to the following in place of the equation object:

Error! Object cannot be created from editing field codes.

It may be possible to unlink the problem equation field, or it may be necessary to delete the equation object and recreate it. In either case, do the following steps:

On the Edit menu, click Undo Update Fields.
Do one of the following:
- Click the problem equation object. Then press CTRL+SHIFT+F9 to unlink the equation object. After the object is unlinked, you cannot edit the object in Equation Editor. However, you may be able to save your Word document.

-or-

- Delete and recreate the equation object. For more information, please see Method 4 later in this article.

Repeat these steps for each problem equation object in your Word document.

Method 3: Paste the Problem Object as a Picture

You may be able to identify a problem equation object in your Word document.

NOTE: Using this method causes your equation editor object to become a picture, and you cannot edit the equation object in Equation Editor. However, you may be able to save your Word document. If you need to edit the equation object, you need to recreate it. For more information, please see Method 4 later in this article.

Click the problem equation object.
On the Edit menu, click Cut.
Make sure the insertion point is located where you want the equation object to appear, and then click Paste Special on the Edit menu.
In the Paste Special dialog box, click Picture and click OK.

Method 4: Recreate the Microsoft Equation Object

Delete the problem equation object and recreate it in Microsoft Equation Editor 3.0.

For more information about how to create a new equation object, click the Office Assistant, type insert equation, click Search, and then click to view "Insert an equation."

NOTE: If the Assistant is hidden, click the Office Assistant button on the Standard toolbar. If Microsoft Help is not installed on your computer, click the article number below to view the article in the Microsoft Knowledge Base:

120802 Office: How to Add/Remove a Single Office Program or Component

Keywords: kb3rdparty kbemail kbenv kberrmsg kbfaq kbprb KB137918

Microsoft KB Archive/137918

Contents