Article ID: 132386
Article Last Modified on 1/19/2007
APPLIES TO
- Microsoft Windows 95
- Microsoft Windows 98 Standard Edition
This article was previously published under Q132386
If this article does not describe your hardware-related issue, please see the following Microsoft Web site to view more articles about hardware:
SYMPTOMS
When you start Windows, your computer may no longer appear on the network.
CAUSE
This behavior can occur if your computer contains a Thomas Conrad TC6245 ArcNet ISA network adapter This network adapter requires a memory exclusion to prevent other devices from using its address space.
RESOLUTION
To resolve this behavior, use either of the following methods to exclude the address space used by the Thomas Conrad network adapter:
Use any text editor (such as Notepad) to add the following line to the [386Enh] section of the System.ini file:
EMMExclude=DC00-DFFFIf you are loading Emm386.exe in the Config.sys file, use any text editor (such as Notepad) to add the following exclusion to the end of the line that loads Emm386.exe:
X=DC00-DFFFFor example, the line in your Config.sys file may be similar to the following line:
DEVICE=C:\Windows\Emm386.exe noems X=DC00-DFFF
After you make the change specified in either method, shut down and then restart your computer.
NOTE: You may have to use different values for the exclusion. Make sure to exclude the actual range the card is configured to use.
Keywords: kbhardware kbnetwork kbprb KB132386
