Article ID: 132128
Article Last Modified on 7/5/2002
APPLIES TO
- Microsoft Access Developer's Toolkit 2.0
This article was previously published under Q132128
Moderate: Requires basic macro, coding, and interoperability skills.
SUMMARY
This article describes how to install and register an OLE control (.OCX) using the Microsoft Access Developer's Toolkit version 2.0 (ADT) Setup Wizard or a third-party installation program.
MORE INFORMATION
To use an OLE control in a Microsoft Access run-time application, you must first install the OLE control and its support files; then, you must register the control in the REG.DAT file in the \Windows\SYSTEM directory. These two procedures are described in detail below.
Installing OLE Custom Controls
If you plan to use a third-party installation program to set up your run- time application, make sure the OLE control and its support files are installed in the following directories:
Directory Filename Description
----------------------------------------------------------------------
\Windows\SYSTEM OC1016.DLL The OLE Control Support DLL shipped
with the ADT.
\Windows\SYSTEM OC25.DLL A support DLL required by controls
created with the OLE Control
Development Kit (CDK) for Microsoft
Visual C\C++ version 2.0. If your
control was not created with the CDK,
this file is not needed.
\<application> MSAREG.EXE The OLE Control registration tool.
\<application> <control>.OCX The OLE Control file.
\<application> DAO2016.DLL A DLL required for custom controls.
If you plan to use the Microsoft ADT Setup Wizard to create your distribution disks, follow these steps to ensure proper installation of OLE controls:
- Open the Microsoft ADT Setup Wizard (SETUPWIZ.MDB) located in your \ACCESS\ADT directory.
- In the "Pick the files to include with your application" box, click the Add File button.
- In the Add File box, enter the full path to your database. Select the "Show in Program Manager Group" and "Run with MSARN200" options. In the INI File box, type the full path to your application's .INI file, and then click the OK button.
- In the "Pick the files to include with your application" box, click the Add File button.
- In the Add File box, type the full path to the OLE control (.OCX) file, and click OK.
- If you are using a third-party OLE control, repeat steps 4 and 5 to add any support DLLs for the OLE control.
If you are using an OLE control included with the Microsoft ADT (the MSACAL20.OCX, MSASB20.OCX, or OUTL1016.DLL files), the Setup Wizard prompts you with the message "The file you've selected depends on 1 file(s). Do you want to see a list?" Click the No button. In the Add File box, click OK. The Setup Wizard adds the OLE support file, OC1016.DLL.
- After you add the OLE control (and its supporting DLLs), click the Next button in the "Pick the files to include with your application" box.
- In the "What optional features does your application support?" box, make sure the OLE 2.01 option (or OLE 2.02, if you installed the Microsoft Access 2.0 Service Pack) is selected.
- In the "What is the name of your application" box, type a name for your application. Also, type a name for the directory that your custom setup program suggests as a default directory, and then click Next.
- In the "Do you want to run another application after Setup is finished?" box, click Next.
- In the "Where do you want to create the disk images" box, type a path for your application's SETUP directory, select a type of disk setup, and then click Finish.
At this point, you can use your distribution disks to set up you run- time application and register any OLE control.
Registering OLE Controls
If you use the Microsoft ADT Setup Wizard to create your distribution disks, your OLE controls are registered automatically when you set up your run-time application. The Microsoft Access Setup program installs and runs the file MSAREG.EXE that registers any .OCX files you picked in the ADT Setup Wizard.
If you plan to use a third-party installation program, make sure all OLE controls are registered properly in the REG.DAT file of the \Windows\SYSTEM directory. To register an OLE control, follow these steps:
- In Windows 3.x, in Program Manager or File Manager, click Run on the File menu. In Windows 95, click the Start Button, and then click Run.
- In the Command box (or Open box in Windows 95), type a command similar to the following line:
MSAREG.EXE C:\<application>\<control>.OCX
For example, to register the Calendar control type the following line:
MSAREG.EXE C:\ACCESS\ADT\MSACAL20.OCX
- Click OK to run the MSAREG.EXE file and to register the OLE control.
NOTE: OLE controls created with the OLE Control Development Kit (CDK) for Microsoft Visual C\C++ version 2.0 require users to install OLE version 2.02. For more information about OLE 2.02, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: 123593
TITLE : ACC2: OLE 2.02 Required to Use Custom Controls
REFERENCES
Microsoft Access "Advanced Topics," version 2.0, Chapter 6, "Using OLE Custom Controls," pages 166-175
For information about how to obtain the Microsoft Access Service Pack, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: 122927
TITLE : WX1124: Microsoft Access Version 2.0 Service Pack
Additional query words: ADT20
Keywords: kbhowto kbsetup KB132128
