Article ID: 125856
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
- Microsoft Windows NT Server 4.0 Standard Edition
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Workstation 4.0 Developer Edition
This article was previously published under Q125856
SUMMARY
This article describes how to use the Remote Access Service (RAS) as your network connection when logging on to a Windows NT domain. This may be necessary if you do not have access to a Wide Area Network (WAN), but you are able to dial and connect to a remote network through RAS. The following topics are discussed:
- How to join a remote domain using RAS
- Creating an account for your RAS client computer on a remote domain
- Connecting to a network using RAS to create a domain list
When you create an account for your RAS client computer on a remote domain, you can be validated by a domain controller on the remote network. This gives you access to domain resources using the same account you use when you are connected directly to the network.
MORE INFORMATION
How to Join a Remote Domain Using RAS
To join a remote domain using RAS, follow these steps:
- Verify that your Windows NT-based computer is configured as a member of a workgroup and not a domain.
- In Control Panel, double-click Network.
- Click Add Software, and then install RAS.NOTE: The next step requires dial-in permissions for your account.
- Use RAS to connect to a RAS server on the remote domain.
NOTE: When a RAS client tries to connect to a resource on a Windows NT Workstation-based computer acting as a RAS server, you may receive the following error message:
To work around this issue, configure your workstation to be a member of a workgroup with the same name as the domain name.
Creating an Account for Your RAS Client Computer on a Remote Domain
It may be necessary to configure an Lmhosts file on the RAS client to enable it to locate the domain controllers if you are utilizing the TCP/IP protocol. You must have the following entries:
a.b.c.d <PDC name> #PRE #DOM:<domain name>
a.b.c.d "domainname \0x1B" #PRE
where a.b.c.d is the IP address of the Primary Domain Controller (PDC), <PDC name> is the NetBIOS name of the PDC, domainname is the NT Domain name, and there exist a total of 15 characters between the opening quotes and the backslash. (for example "<15 char.>\0x1B")
To create an account for your RAS client computer on a remote domain, follow these steps:
- In Control Panel, double-click Network.
- Click Change, click Domain, and then type the name of the remote domain you want to join in the Domain box.
- Select the Create Computer Account In Domain check box.
- Type the name of a user account (with administrative privileges in the domain you are joining) in the User Name box, and then type the password for that account in the Password box.
- Click OK. If this procedure is successful, the following message appears:
Welcome to the <domain name> domain
- Restart your computer.
Connecting to a Network Using RAS to Create a Domain List
To connect to a network using RAS to create a domain list, follow these steps:
- Log on to your Windows NT-based computer using a local user account.
- Use RAS to connect to a RAS server on the remote domain.
- Click Logoff on the Program Manager File menu. Note that your RAS connection is maintained when you do this.
NOTE: For Windows NT version 4.0 you will need to set the KeepRASConnections registry key to keep the RAS connection open when you logoff.For additional information, click the article number below to view the article in the Microsoft Knowledge Base:158909 How to Keep RAS Connections Active After Logging Off
- Press CTRL+ALT+DELETE, and then log on. The domain list is created through the RAS link.
- Log on to the remote domain.
NOTE: After you have logged on to the remote domain once, your domain credentials are cached locally. Therefore, you do not have to repeat step 5 when you log onto the remote domain again.
Additional query words: prodnt applet off machine
Keywords: kbhowto kbnetwork KB125856
