Article ID: 124431
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Server 3.5
This article was previously published under Q124431
SYMPTOMS
If you install Windows NT 3.5 over Windows NT 3.1, SNMP traps are not received by your network agent. If you have access to a network monitor or sniffer, you can see the traps being sent to the wrong port.
CAUSE
Under Windows NT 3.1, builds 511 and 528, the entry in the SERVICES file for SNMP-TRAP was set (incorrectly) to port 167. The SERVICES file under Windows NT 3.5 has the entry for SNMP-TRAP correctly set to port 162. The SERVICES file is copied only if the file does not already exist when you upgrade to Windows NT 3.5. Since it exists from the Windows NT 3.1 installation, the new SERVICES file with the corrected port number is not copied.
This was not a problem under Windows NT 3.1 is because SNMP did not look in the SERVICES file to determine which port to use. The SNMP that ships with Windows 3.5 does look in the SERVICES file to determine which port to use for sending SNMP traps.
RESOLUTION
Edit the SERVICES file in the %SYSTEMROOT%\SYSTEM32\DRIVERS\ETC directory and change the SNMP-TRAP entry from
snmp-trap 167/udp snmp
to:
snmp-trap 162/udp snmp
STATUS
Microsoft has confirmed this to be a problem in Windows NT version 3.5. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.
Additional query words: prodnt blue screen
Keywords: KB124431