Article ID: 122898
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Workstation 3.5
This article was previously published under Q122898
3.10 3.50
WINDOWS
kbnetwork kbbug3.10 kbbug3.50
The DEC Pathworks for Windows NT network does not function properly under Windows NT or Windows NT Advanced Server version 3.1 or Windows NT 3.5 with a 3COM Etherlink III network adapter. You might have problems installing the software, or there may be messages logged in the Event Viewer.
DEC Pathworks for Windows NT needs to be able to perform a "Set Station Address" to the 3COM Etherlink III card. This ability is required, because DECnet expects that card to change it's address to AA-00-00-xx-xx-xx, (where the xx-xx-xx is the actual DECNET node ID) and not the physical hardware address of the card. With the current 3COM drivers that Microsoft ships, this function is not possible. (Note: This problem may also occur with other network adapters whose drivers do not enable this functionality). There is currently no workaround.
STATUS
Microsoft has confirmed this to be a problem in Windows NT and Windows NT Advanced Server version 3.1 and Windows NT 3.5. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.
Additional query words: prodnt 3.10
Keywords: KB122898
