Microsoft KB Archive/121074

Knowledge Base

Some Error Messages When Printing in Windows

Article ID: 121074

Article Last Modified on 2/20/2007

---

APPLIES TO

• Microsoft Windows 2000 Server
• Microsoft Windows 2000 Advanced Server
• Microsoft Windows 2000 Professional Edition
• Microsoft Windows 2000 Datacenter Server
• Microsoft Windows NT Advanced Server 3.1
• Microsoft Windows NT Server 3.5
• Microsoft Windows NT Server 3.51
• Microsoft Windows NT Server 4.0 Standard Edition
• Microsoft Windows NT Workstation 3.1
• Microsoft Windows NT Workstation 3.5
• Microsoft Windows NT Workstation 3.51
• Microsoft Windows NT Workstation 4.0 Developer Edition
• Microsoft Windows NT Advanced Server 3.1

---

This article was previously published under Q121074

SYMPTOMS

When you try to connect to a printer shared by a Windows computer, one of the following errors may appear when you enter the network path or port name:

\\servername\sharename is an invalid port name

-OR-

Could not connect to the printer: The system cannot find the file specified

-OR-

Test Page failed to print. Would you like to view the print trouble shooter for assistance? The filename, directory name, or volume label syntax is incorrect.

-OR-

Test page failed to print. Would you like to view the print trouble shooter for assistance? Unable to create a print job.

-OR-

Could not start print job.

-OR-

A StartDocPrinter call was not issued.

CAUSE

These messages are erroneous and occur if the Windows printer share is password protected. If you attempt to connect to the share by running a NET USE from the command line, you receive this (correct) message:

The password is invalid for \\servername\sharename

You are allowed to enter the password of the share.

RESOLUTION

To resolve this issue, use one of the following procedures:

• Method 1: Remove the password protection from the Windows printer share.
• Method 2:
  1. Make a connection to the share using the command prompt, and then enter the correct password with the following syntax:

     NET USE LPTx \\computernamne\printername [password]

  2. Use Print Manager or the Printers folder to create a new printer that uses the redirected LPT port.

For additional information, click the article number below to view the article in the Microsoft Knowledge Base:

103747 Err Msg: \\Server\Share Is an Invalid Port Name

You can also query the following phrase in the Microsoft Knowledge Base:

   invalid port name
                

STATUS

Microsoft is researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

Additional query words: wfw wfwg prodnt 3.10 3.11 lanman share level security

Keywords: KB121074

---

Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.