Article ID: 114230
Article Last Modified on 10/31/2006
APPLIES TO
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q114230
SYMPTOMS
Windows NT applications fail when attempting to communicate through RAS, although they can communicate through NetBEUI if they are on the same network. Attempts to send a datagram back to the workstation from the Windows NT application also fail.
A protocol analyzer sees no RAS traffic from the remote machine to the network.
CAUSE
The failure occurs when a program sends datagrams with a NetBIOS name as the destination, but with the Permanent Name (Ethernet card address) of the sending workstation as the source. RAS servers do not accept Permanent Name IDs because RAS workstations are not guaranteed to have unique IDs, as are workstations with network adapter cards.
RESOLUTION
Change the application to send datagrams that use a NetBIOS name as the source. The application routine submitting the datagram must use a NetBIOS name registered by the application, and should copy the name into the Source Name field of the network control block before calling NetBIOS.
NetBIOS chat programs--which communicate with datagrams, using unique NetBIOS names created by the applications--operate successfully through RAS. The Net send 'domain' command is a good example. When delivering to a domain, it uses a datagram mechanism.
CONFIGURATION
The problem was been observed on this configuration:
Windows NT Advanced Server 3.1 (528:CSD002) RAS server
Windows NT 3.1 (528:CSD002), WFWG 3.11 or LM 2.2; Win3.1 Clients
Additional query words: prodnt
Keywords: kbnetwork KB114230
