Article ID: 111466
Article Last Modified on 10/27/1999
APPLIES TO
- Microsoft Windows for Workgroups 3.11
This article was previously published under Q111466
SYMPTOMS
If you use the Racal NI6510 network interface card (NIC) driver that ships with Windows for Workgroup 3.11 and you have the Racal Etherblaster network card installed in your system, you may receive the following error messages after you reboot your computer:
-and/or-
-and/or-
CAUSE
Although Microsoft does not ship an NDIS 3 driver for this card, the NDIS 2 driver (NI6510.DOS) should work correctly with the Etherblaster. However, Racal has confirmed that the driver shipped with Windows for Workgroups 3.11 does not work with this NIC.
RESOLUTION
To correct this problem, you must use the NI6510.DOS driver from Racal. If you have a modem, you can download this driver from the Racal bulletin board service at (508) 264-4345. The file date is 9/17/93 and the file size is 11,124 bytes. Racal will have an NDIS 3 driver for this NIC available in the future.
For more information, call Racal Technical Support at (800) 526-8225.
Additional query words: 3.11
Keywords: KB111466