Article ID: 111304
Article Last Modified on 1/8/2003
APPLIES TO
- Microsoft Visual Basic 3.0 Professional Edition
This article was previously published under Q111304
SYMPTOMS
The following error is the result when you Update or Add a Text field in a table and the total record size exceeds about 2000 bytes for all fields combined (not counting Memo fields):
CAUSE
Records in a table in a Visual Basic or in a Microsoft Access database are limited to slightly under 2K, not counting Memo fields. The "Record is too large" error occurs when you enter data into such a record, not when you define the table structure.
RESOLUTION
Redefine the table by making some fields shorter or by removing unneeded fields.
You can also avoid this problem by using fields with the Memo type instead of the Text type. You can set a field's Type property to 12 to get a Memo type, instead of 10 to get a Text type. When a Memo field is greater than 250 bytes or whenever the 2K limit is reached on a record, Visual Basic automatically puts the Memo field on a separate page in the database file. If your Text fields contain related data, you could further improve space usage by concatenating the fields into one large Memo field.
STATUS
This behavior is by design.
MORE INFORMATION
Steps to Reproduce Behavior
- Start a new project in Visual Basic. Form1 is created by default.
Add the following to the Form Load event code:
Sub Form_Load () ' @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ' Create an empty database with the following design: Const DB_LANG_GENERAL = ";LANGID=0x0809;CP=1252;COUNTRY=0" Const numfields = 9 'Number of text fields to add to db, minus 1. Dim db As Database Dim MyDS As Dynaset Dim tdef As New TableDef Dim FieldInteger As New field Dim fieldname0 As New field Dim fieldname1 As New field Dim fieldname2 As New field Dim fieldname3 As New field Dim fieldname4 As New field Dim fieldname5 As New field Dim fieldname6 As New field Dim fieldname7 As New field Dim fieldname8 As New field Dim fieldname9 As New field Dim uniqindex As New Index form1.Show ' Must Show form in Load event for Print to work. Kill "c:\tempx.MDB" Set db = CreateDatabase("c:\tempx.MDB", DB_LANG_GENERAL) tdef.Name = "Testtable" ' Name of table to create. 'Define the fields in the Testtable table: FieldInteger.Name = "fieldinteger" FieldInteger.Type = 4 'Long integer fieldname0.Name = "fieldname0" fieldname0.Type = 10 ' Type 10 = Text. Type 12 = Memo. fieldname0.Size = 255 ' Maximum size of field. fieldname1.Name = "fieldname1" fieldname1.Type = 10 ' Type 10 = Text. Type 12 = Memo. fieldname1.Size = 255 ' Maximum size of field. fieldname2.Name = "fieldname2" fieldname2.Type = 10 ' Type 10 = Text. Type 12 = Memo. fieldname2.Size = 255 ' Maximum size of field. fieldname3.Name = "fieldname3" fieldname3.Type = 10 ' Type 10 = Text. Type 12 = Memo. fieldname3.Size = 255 ' Maximum size of field. fieldname4.Name = "fieldname4" fieldname4.Type = 10 ' Type 10 = Text. Type 12 = Memo. fieldname4.Size = 255 ' Maximum size of field. fieldname5.Name = "fieldname5" fieldname5.Type = 10 ' Type 10 = Text. Type 12 = Memo. fieldname5.Size = 255 ' Maximum size of field. fieldname6.Name = "fieldname6" fieldname6.Type = 10 ' Type 10 = Text. Type 12 = Memo. fieldname6.Size = 255 ' Maximum size of field. fieldname7.Name = "fieldname7" fieldname7.Type = 10 ' Type 10 = Text. Type 12 = Memo. fieldname7.Size = 255 ' Maximum size of field. fieldname8.Name = "fieldname8" fieldname8.Type = 10 ' Type 10 = Text. Type 12 = Memo. fieldname8.Size = 255 ' Maximum size of field. fieldname9.Name = "fieldname9" fieldname9.Type = 10 ' Type 10 = Text. Type 12 = Memo. fieldname9.Size = 255 ' Maximum size of field. 'Add the fieldinteger and fieldnameN fields to the Fields collection: tdef.Fields.Append FieldInteger tdef.Fields.Append fieldname0 tdef.Fields.Append fieldname1 tdef.Fields.Append fieldname2 tdef.Fields.Append fieldname3 tdef.Fields.Append fieldname4 tdef.Fields.Append fieldname5 tdef.Fields.Append fieldname6 tdef.Fields.Append fieldname7 tdef.Fields.Append fieldname8 tdef.Fields.Append fieldname9 'Define fieldinteger_index, the unique primary-key index: uniqindex.Name = "fieldinteger_index" uniqindex.Fields = "fieldinteger" uniqindex.Unique = True uniqindex.Primary = True 'Append the fieldinteger_index index to the Indexes collection: tdef.Indexes.Append uniqindex 'Append the tdef table definition (TableDef object) to the TableDefs 'collection: db.TableDefs.Append tdef db.Close ' The above code creates the empty database. ' @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Set db = OpenDatabase("c:\tempx.MDB") ' Open the empty database. Set MyDS = db.CreateDynaset("Testtable") ' Make dynaset from table. For i = 0 To 5 ' Add index field values for 5 new records: MyDS.AddNew MyDS!FieldInteger = i MyDS.Update Next MyDS.MoveFirst ' Move to the first record. ' Add more than 2K of string data to the fields in the first record: For j = 0 To numfields MyDS.Edit ' Opens current record for editing, into copy buffer. f$ = "fieldname" & j Debug.Print f$ ' The maximum allowed record size is a little less than 2K. ' Fields fieldname0 through fieldname6 are each assigned 255 bytes ' with no problem. However, when assigning fieldname7, following ' field assignment fails at run time with Error 3047: ' "Record is too large" MyDS(f$) = String$(255, "x") 'Assign 255 bytes to each text field. MyDS.Update ' Saves the copy buffer to the table. Next MyDS.Close db.Close End Sub- Start the program, or press the F5 key. After a few seconds, the program gives Error 3047, "Record is too large." Choose End from the Run menu to clear the error.
To correct this behavior, redefine the database using fields of type Memo instead of type Text. In the program listed above, replace all the
fieldnamex.Type = 10
statements with:
fieldnamex.Type = 12
where x = 0 to 9.
Additional query words: 3.00 limitation specification larger smaller bigger
Keywords: kbprb KB111304
