Article ID: 884056
Article Last Modified on 6/2/2006
APPLIES TO
- Microsoft Windows 2000 Server
- Microsoft Windows 2000 Professional Edition
- Microsoft Windows 2000 Advanced Server
- Microsoft Windows Server 2003, Standard Edition (32-bit x86)
- Microsoft Windows Server 2003, Enterprise Edition (32-bit x86)
Important This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 Description of the Microsoft Windows Registry
SYMPTOMS
When you press the power button on an Advanced Configuration and Power Interface (ACPI)-compliant computer that is running Microsoft Windows 2000 or Microsoft Windows Server 2003, you may receive a 0x77 or 0x7A Stop error message.
CAUSE
This problem occurs because a SCSI adaptor does not receive a stop request while the system is shutting down.
RESOLUTION
To resolve this problem, install the hotfix that is described in this article, and then configure a new registry option that is named NeedsSystemShutdownNotification. This new registry option controls whether a particular SCSI adaptor must be sent a stop request while the system is shutting down. For information about how to add and to configure the registry option, see the "More Information" section.
Note Computers that are running Windows Server 2003 do not need to apply this hotfix because the registry key is supported natively. To enable this fix for Windows Server 2003, follow the steps in the "More Information" section.
Hotfix information
A supported hotfix is now available from Microsoft, but it is only intended to correct the problem that this article describes. Apply it only to systems that are experiencing this specific problem.
To resolve this problem, contact Microsoft Product Support Services to obtain the hotfix. For a complete list of Microsoft Product Support Services telephone numbers and information about support costs, visit the following Microsoft Web site:
Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Microsoft Support Professional determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.
Prerequisites
Microsoft Windows 2000 Service Pack 3 (SP3)
Restart requirement
You must restart your computer after you apply this hotfix.
Hotfix replacement information
This hotfix does not replace any other hotfixes.
File information
The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.
Date Time Version Size File name -------------------------------------------------------------- 29-Sep-2004 05:07 5.0.2195.6980 74,384 Scsiport.sys
STATUS
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
MORE INFORMATION
Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
To configure the new registry option, add a DWORD that is named NeedsSystemShutdownNotification and that has a value of 1 to the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Bus\deviceId\device\Device Parameters\ScsiPort
Note You must select the correct subkeys for Bus, deviceId, and device. For example, for a PCI bus device, you might add a DWORD that is named NeedsSystemShutdownNotification and that has a value of 1 to a registry subkey that is similar to the following:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI\VEN_1039&DEV_0001&SUBSYS_00000000&REV_00\3&61aaa01&0&08\Device Parameters\ScsiPort
To configure the new registry option, follow these steps:
- Click Start, click Run, type regedit, and then click OK.
- Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\
Bus\deviceId\device\Device Parameters\ScsiPort
Note If the ScsiPort subkey does not exist, you must create it. To do this, follow these steps:- Locate and then click the following subkey in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\
Bus\deviceId\device\Device Parameters - On the Edit menu, point to New, and then click Key.
- Type ScsiPort for the name of the subkey, and then press ENTER.
- Click the ScsiPort subkey.
- Locate and then click the following subkey in the registry:
- On the Edit menu, point to New, and then click DWORD Value.
- Type NeedsSystemShutdownNotification for the name of the DWORD, and then press ENTER.
- Right-click NeedsSystemShutdownNotification, and then click Modify.
- In the Value data box, type 1, and then click OK.
- Quit Registry Editor.
Note To configure the adaptor driver to use the value, modify the .inf file for the adaptor driver with information that is similar to the following:
[install_section_name.HW]
HKR, “ScsiPort”, “NeedsSystemShutdownNotification”, 0x00010001, 1
For more information about how to configure the adaptor driver, see the latest version of the Microsoft Windows Driver Development Kit (DDK) documentation. For additional information about the DDK, visit the following Microsoft Web page:
For additional information, click the following article numbers to view the articles in the Microsoft Knowledge Base:
816915 New file naming schema for Microsoft Windows software update packages
824684 Description of the standard terminology that is used to describe Microsoft software updates
Keywords: kberrmsg kbbug kbfix kbqfe kbwin2000presp5fix kbhotfixserver KB884056
