OFFXP: Listing of Windows Installer Errors (1000-1999) |
Q290159
The information in this article applies to:
- Microsoft Office XP (Setup)
For a Microsoft Office 2000 version of this article, see Q228536.
SUMMARY
This article contains a listing of the error codes 1000 through 1999 and their message text for the Microsoft Windows Installer (MSI). This article is one of two articles to list these error codes. For a listing of error codes 2000 to 2999 click the article number below to view the article in the Microsoft Knowledge Base:
Q290161 OFFXP: Listing of Windows Installer Errors (2000-2999)
NOTE: Although the error code information in this article can help you diagnose your installation, multiple problems can cause a single error message. Therefore, the information in this article is only the first step towards troubleshooting the cause of the problem.
Specific Microsoft Knowledge Base articles will be created to address frequently occurring error messages as they become available. You also need to analyze the Setup log files created.
For additional information about troubleshooting Office XP Setup by using log files, click the article number below to view the article in the Microsoft Knowledge Base:
Q296604 OFFXP: How to Customize Office Setup Logging Options
MORE INFORMATION
Error messages containing values enclosed in brackets, such as [1] or [2], refer to specific files or message text that may be different in each situation.
Code Message ---- ------- 1101 Could not open file stream: [2]. System error: [3] 1301 Cannot create the file '[2]'. A directory with this name already exists. 1302 Please insert the disk: [2] 1303 The Installer has insufficient privileges to access this directory: [2]. 1304 Error Writing to File: [2] 1305 Error Reading from File: [2]; System error code: [3] 1306 The file '[2]' is in use. If you can, please close the application that is using the file, then click Retry. 1307 There is not enough disk space remaining to install this file: [2]. If you can, free up some disk space, and click Retry, or click Cancel to exit. 1308 Source file not found: [2] 1309 Error attempting to open the source file: [3]. System error code: [2] 1310 Error attempting to create the destination file: [3]. System error code: [2] 1311 Could not locate source file cabinet: [2]. 1312 Cannot create the directory '[2]'. A file with this name already exists. Please rename or remove the file and click retry, or click Cancel to exit. 1313 The volume [2] is currently unavailable. Please select another. 1314 The specified path '[2]' is unavailable. 1315 The specified folder '[2]' is not writable. 1316 A network error occurred while attempting to read from the file: [2] 1317 An error occurred while attempting to create the directory: [2] 1318 A network error occurred while attempting to create the directory: [2] 1319 A network error occurred while attempting to open the source file cabinet: [2]. 1320 The specified path is too long: '[2]' 1321 The Installer has insufficient privileges to modify this file: [2]. 1322 A portion of the folder path '[2]' exceeds the length allowed by the system. 1323 The folder path '[2]' contains words that are not valid in folder paths. 1324 The folder path '[2]' contains an invalid character. 1325 '[2]' is not a valid short file name. 1326 Error getting file security: [3] GetLastError: [2] 1327 Invalid Drive: [2] 1401 Could not create key: [2]. System error [3]. 1402 Could not open key: [2]. System error [3]. 1403 Could not delete value [2] from key [3]. System error [4]. 1404 Could not delete key [2]. System error [3]. 1405 Could not read value [2] from key [3]. System error [4]. 1406 Could not write value [2] to key [3]. System error [4]. 1407 Could not get value names for key [2]. System error [3]. 1408 Could not get sub key names for key [2]. System error [3]. 1409 Could not read security information for key [2]. System error [3]. 1410 Could not increase the available registry space. [2] KB of free registry space is required for the installation of this application. 1500 Another installation is in progress. You must complete that installation before continuing this one. 1501 Error accessing secured data. Please make sure the Windows Installer is configured properly and try the install again. 1502 User '[2]' has previously initiated an install for product '[3]'. That user will need to run that install again before they can use that product. Your current install will now continue. 1503 User '[2]' has previously initiated an install for product '[3]'. That user will need to run that install again before they can use that product. 1601 Out of disk space -- Volume: '[2]'; required space: [3] KB; available space: [4] KB 1602 Are you sure you want to cancel? 1603 The file [2][3] is being held in use{ by the following process: Name: [4], Id: [5], Window Title: '[6]'}. 1604 The product '[2]' is already installed, and has prevented the installation of this product. 1605 Out of disk space -- Volume: '[2]'; required space: [3] KB; available space: [4] KB. If rollback is disabled, enough space is available. Click 'Cancel' to quit, 'Retry' to check available disk space again, or 'Ignore' to continue without rollback. 1606 Could not access location [2]. 1607 The following applications should be closed before continuing the install: 1608 Could not find any previously installed compliant products on the machine for installing this product 1701 [2] is not a valid entry for a product ID. 1702 Configuring [2] cannot be completed until you restart your system. To restart now and resume configuration click Yes, or click No to stop this configuration. 1703 For the configuration changes made to [2] to take effect you must restart your system. To restart now click Yes, or click No if you plan to manually restart at a later time. 1704 An install for [2] is currently suspended. You must undo the changes made by that install to continue. Do you want to undo those changes? 1705 A previous install for this product is in progress. You must undo the changes made by that install to continue. Do you want to undo those changes? 1706 No valid source could be found for product [2] 1707 Installation operation completed successfully. 1708 Installation operation failed. 1709 Product: [2] -- [3] 1710 You may either restore your computer to its previous state or continue the install later. Would you like to restore? 1711 An error occurred while writing installation information to disk. Check to make sure enough disk space is available, and click Retry, or Cancel to end the install. 1712 One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible. 1801 The path [2] is not valid 1802 Out of memory 1803 There is no disk in drive [2]. Please, insert one and hit Retry, or hit Cancel to go back to the previously selected volume. 1804 There is no disk in drive [2]. Please, insert one and hit Retry, or hit Cancel to return to the browse dialog and select a different volume. 1805 The path [2] does not exist 1806 You have insufficient privileges to read this folder. 1807 A valid destination folder for the install could not be determined. 1901 Error attempting to read from the source install database: [2] 1902 Scheduling reboot operation: Renaming file [2] to [3]. Must reboot to complete operation. 1903 Scheduling reboot operation: Deleting file [2]. Must reboot to complete operation. 1904 Module [2] failed to register. HRESULT [3]. 1905 Module [2] failed to unregister. HRESULT [3]. 1906 Failed to cache package [2]. Error: [3] 1907 Could not register font [2]. Verify that you that you have sufficient permissions to install fonts, and that the system supports this font. 1908 Could not unregister font [2]. Verify that you that you have sufficient permissions to remove fonts. 1909 Could not create Shortcut [2]. Verify that the destination folder exists and that you can access it. 1910 Could not remove Shortcut [2]. Verify that the shortcut file exists and that you can access it. 1911 Could not register type library for file [2]. Contact your support personnel. 1912 Could not unregister type library for file [2]. Contact your support personnel. 1913 Could not update the ini file [2][3]. Verify that the file exists and that you can access it. 1914 Could not schedule file [2] to replace file [3] on reboot. Verify that you have write permissions to file [3]. 1915 Error removing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel. 1916 Error installing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel. 1917 Error removing ODBC driver: [4], ODBC error [2]: [3]. Verify that you have sufficient privileges to remove ODBC drivers. 1918 Error installing ODBC driver: [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it. 1919 Error configuring ODBC data source: [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it. 1920 Service '[2]' ([3]) failed to start. Verify that you have sufficient privileges to start system services. 1921 Service '[2]' ([3]) could not be stopped. Verify that you have sufficient privileges to stop system services. 1922 Service '[2]' ([3]) could not be deleted. Verify that you have sufficient privileges to remove system services. 1923 Service '[2]' ([3]) could not be installed. Verify that you have sufficient privileges to install system services. 1924 Could not update environment variable '[2]'. Verify that you have sufficient privileges to modify environment variables. 1925 You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation. 1926 Could not set file security for file '[3]'. Error: [2]. Verify that you have sufficient privileges to modify the security permissions for this file.
Additional query words: OFFXP inf
Keywords : kberrmsg kbdta
Issue type : kbhowto
Technology : kbOfficeSearch kbOfficeXPSearch kbOfficeXPSetup
Last Reviewed: June 28, 2001 |