Article ID: 286902
Article Last Modified on 7/27/2006
APPLIES TO
- Microsoft Word 2002 Standard Edition
This article was previously published under Q286902
For a Microsoft Word 2000 version of this article, see 289725.
SYMPTOMS
When you print a Microsoft Word document, and the document contains a watermark, or a WordArt object, the watermark or the WordArt object appears to be a solid black block.
CAUSE
This problem can occur with the following printers on the following operating systems:
- HP LaserJet 4MV with Microsoft Windows 2000
- HP LaserJet 4+ with Microsoft Windows 98 (Watermark is too dark)
- HP Color LaserJet 4500 with Microsoft Windows 98 or Microsoft Windows 2000
The problem only occurs when the printer is not set to raster mode and the watermark is set to semitransparent, or the WordArt transparency is set to 50%.
WORKAROUND
To resolve this problem, use one of the following methods.
Method 1: Update Printer Driver
Contact the manufacturer of your printer to determine if an updated printer driver is available to correct this problem. For information about how to contact your printer manufacturer, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base:
65416 Hardware and Software Third-Party Vendor Contact List, A-K
60781 Hardware and Software Third-Party Vendor Contact List, L-P
60782 Hardware and Software Third-Party Vendor Contact List, Q-Z
Method 2: Use Raster Mode
Set your printer graphics mode to raster. To change your printer graphics mode, use steps similar to the following (depending on your individual printer):
- In Word, on the File menu, click Print.
- In the Print dialog box, click Properties.
- In the Printer Properties dialog box, click the Options tab.
- In the Graphics Mode list, select Raster.
Method 3: Clear the Semitransparent Check Box
Do not use the Semitransparent option with a watermark. To insert a watermark without using the default Semitransparent option, follow these steps:
- On the Format menu, point to Background, and then click Printed Watermark.
- On the Printed Watermark dialog box, click Text watermark.
- Click to clear the Semitransparent check box, and then click OK.
Method 4: Change Transparency Percentage
Do not set WordArt transparency format to 50%. To determine the transparency setting of a WordArt object, and change it if necessary, follow these steps:
- Right-click the WordArt object. On the shortcut menu that appears, click Format WordArt.
- In the Format WordArt dialog box, note the setting in the Transparency box, and change it if necessary.
- Click OK.
STATUS
Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article.
MORE INFORMATION
The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.
Keywords: kbbug kbnofix KB286902
