Article ID: 186541
Article Last Modified on 2/23/2007
APPLIES TO
- Microsoft Windows Server 2003, Standard Edition (32-bit x86)
- Microsoft Windows Server 2003, Enterprise Edition (32-bit x86)
- Microsoft Windows Server 2003, Datacenter Edition (32-bit x86)
- Microsoft Windows XP Professional
- Microsoft Windows 2000 Server
- Microsoft Windows NT Server 4.0, Terminal Server Edition
This article was previously published under Q186541
SUMMARY
This article describes Terminal Server error messages 2400 to 2499.
MORE INFORMATION
Error 2400
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The LAN adapter number in the configuration file is incorrect.
Action: A NETn entry in the [networks] section of the computer's configuration file needs to be corrected. See your network administrator if you need assistance.
Error 2401
Explanation: You tried to delete an active connection. There are open files or requests pending on this connection.
Action: Close all files and end all programs related to the connection before you try to delete it.
Error 2402
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. You tried to delete a network connection that has an active process, or you tried to log off while you have an active process.
Action: Be sure that the processes running on a server are completed before you break the connection to that server, and that processes on all remote servers are completed before you log off.
Error 2403
Explanation: Either the share name or password you typed is incorrect.
Action: Check the spelling of the share name or password. If you still have problems, ask your network administrator to verify the password and the share name. Your administrator should also verify that you have access to the resource. This problem can also be caused by duplicate computer names. Do not give computers on different networks identical computer names if there is any computer that is on both networks.
Error 2404
Explanation: The drive letter you specified is the current drive of a session. You tried to delete a drive redirection (x:) while it is in use, possibly as your current drive.
Action: Be sure the drive you are trying to delete is not the current drive in any of your sessions.
Error 2405
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. You tried to assign a local drive letter to a shared resource.
Action: Use a drive letter that does not correspond to a local drive.
Error 2430
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A program requested the Alerter notify it of an event for which it is already receiving notifications.
Action: Contact technical support.
Error 2431
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The number of alert notifications requested exceeded the number specified by the NUMALERTS entry in your configuration file.
Action: Increase the value of the NUMALERTS entry. Then stop and restart the workstation service.
Error 2432
Explanation: A software error occurred.
Action: Be sure the Alerter service is started. If this error occurs while the Alerter service is started, contact technical support.
Error 2433
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred.
Action: Contact technical support.
Error 2434
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. LAN Manager ended a user's session with this server because the user's logon time expired.
Action: No action is needed. To define the times during which a user can access the server, type:
NET USER username /TIMES:times
Error 2440
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred.
Action: Contact technical support.
Error 2450
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The user accounts database is not configured properly. There may be a conflict between the computer's role, which defines how this server participates in logon security, and the server's record of the name of the primary domain controller. For example, the role of this computer may be set to PRIMARY while the primary domain controller entry names a different server.
Action: Contact your network administrator.
Error 2451
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. You cannot perform this task while the Netlogon service is running.
Action: To perform this task, stop the Netlogon service on the server. Retype the command, and then restart the Netlogon service.
Error 2452
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. This is the only account with administrative privilege. You cannot delete it.
Action: You must add another account with administrative privilege before deleting this one.
Error 2453
Explanation: Windows NT could not find the domain controller for this domain. This task cannot be completed unless the domain controller is running in this domain.
Action: Start the Netlogon service on the domain controller.
Error 2454
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The logon server could not update the logon or logoff information.
Action: Stop and restart the Netlogon service at the server that returned this error.
Error 2455
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The Netlogon service is not running.
Action: Start the Netlogon service at the server, and then type the command again.
Error 2456
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The user accounts database cannot be enlarged because the server's hard disk is full.
Action: Check the server's disk and remove unnecessary and outdated files.
Error 2457
Error 2458
Error 2460
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred.
Action: If this error persists or causes other errors, contact technical support.
Error 2461
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred.
Action: If this error persists or causes other errors, contact technical support.
Error 2462
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred.
Action: If this error persists or causes other errors, contact technical support.
Error 2463
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The table of available servers is full. You will not be able to see a complete list of network servers when you type the NET VIEW command or use the LAN Manager Screen.
Action: Stopping other processes or services on the workstation may free enough memory to correct this problem. MS-DOS workstations have a NUMSERVERS entry in the configuration file, which specifies the number of servers that the workstation can list with NET VIEW. Increasing this value can solve this problem, but will also use more memory.
Error 2464
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The server is supporting the maximum number of sessions.
Action: Try the command later. You will not be able to start a session with this server until another user's session has ended. Also, see your network administrator. Your administrator may want to purchase an Additional User Pak for the server or increase the value of the MAXUSERS entry of the server's configuration file.
Error 2465
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The server is supporting the maximum number of connections.
Action: To make another connection to the server, first end a current connection. If you have no connections that you can end, try your command again later. You will be able to make your connection once another user's connection is ended. Also, see your network administrator. The administrator may want to increase the value of the MAXCONNECTIONS entry of the server's configuration file.
Error 2466
number.
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. No more files on the server can be opened.
Action: To open another file, you will first have to close a file or stop a network application that has open files. Also, see your network administrator. Your administrator may want to increase the value of the MAXOPENS entry in the server's configuration file.
Error 2467
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. This server has no alternate servers registered.
Action: Contact your network administrator.
Error 2470
Error 2480
Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The UPS service could not access the UPS driver (UPSDRV.OS2). The UPS driver might not be configured properly.
Action: Be sure that your CONFIG.SYS file has a DEVICE line specifying the location of the UPS device driver and that the /PORT option of that line specifies the serial port that the UPS is connected to. This line must appear before any other lines that install other serial port drivers. If you make changes to Config.sys, you will need to reboot your system for them to take effect.
Error 2481
Action: Follow these steps to configure a UPS:
- Click Start, click Settings, and then point to Control Panel.
- Double-click Power Options.
- Click the UPS tab.
- Click Select.
- Choose the manufacturer that you wish to configure, and then click Finish.
For Microsoft Windows NT 4.0
- Click Start, point to Settings, and then click Control Panel.
- Double-click UPS.
- Click to select the Uninterruptible Power Supply is installed on check box, and then choose a port in the box list.
- Under UPS Configuration, set configurations, and then click OK.
Error 2482
Error 2483
Error 2484
Keywords: kbinfo KB186541