Article ID: 157174
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows 95
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
This article was previously published under Q157174
SYMPTOMS
If you are logging on to a Windows NT domain over a remote access service (RAS) connection and you have an associated Windows NT logon script, the logon script does not run when you log on to the domain through the RAS server. This problem occurs if your computer is running Windows 95.
CAUSE
When you started Windows 95, you may have tried to log on at the first prompt during startup. At that point, you would have received an error message stating that there is no server to validate you because you are a remote user and not on the network. The text of the error message is:
As this point, the logon script can no longer be run when logging on to the domain later over a RAS connection.
WORKAROUND
To work around this issue, you can click Cancel when you are logging on at Windows 95 startup. Then, when you dial the RAS server, you again receive the dialog box to log on. This time, the logon script associated with the account runs correctly. However, if you cancel the initial Windows 95 logon prompt, be aware that you will be unable to save your passwords when you connect by using Dial-Up Networking to other servers. The Save Password check box will be unavailable, and previously saved passwords will not be filled in for you automatically.
Because of the inability to save passwords when you cancel the Windows 95 startup logon, a preferred method of resolve this issue is to disable the network adapter in the computer that is causing the initial network logon prompt to appear when you start Windows. You can accomplish this most easily by creating a new hardware profile that has the network adapter disabled. For example, this would allow you to use a laptop computer that has a network adapter built into the motherboard to have one hardware profile for use when the network adapter is needed (when you are connected to the corporate LAN), and a separate hardware profile with the network adapter disabled in Device Manager for when the laptop computer is mobile and you make use of Dial-Up Networking to connect to a corporate RAS server.
Note that this issue in Windows 95 has been successfully resolved in some scenarios by using the updated file for Windows 95 described in the following Microsoft Knowledge Base article in conjunction with the Dial-Up Networking (DUN) 1.3 update:
154434 You receive a "No domain server was available to validate your logon" error message when you use Dial-Up Networking in Windows 95 to dial into a remote network
In these scenarios, which involve computers with built-in network adapters that sometimes are plugged into a LAN and at other times are disconnected from the LAN and using Dial-Up Networking to connect to a RAS server on the LAN, the issue was resolved by applying the DUN 1.3 upgrade first, and then applying the updated files listed in the article.
Additional query words: prodnt tshoot login execute executed
Keywords: kbinterop kbnetwork kbprb KB157174
