Article ID: 132465
Article Last Modified on 10/11/2007
APPLIES TO
- Microsoft Windows 2000 Server
- Microsoft Windows 2000 Advanced Server
- Microsoft Windows 2000 Professional Edition
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Workstation 4.0 Developer Edition
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
- Microsoft Windows NT Server 4.0 Standard Edition
- Microsoft Windows Server 2003 Standard Edition (32-bit x86)
- Microsoft Windows Server 2003, 64-Bit Datacenter Edition
- Microsoft Windows Server 2003, 64-Bit Enterprise Edition
- Microsoft Windows Server 2003, Datacenter Edition (32-bit x86)
- Microsoft Windows Server 2003, Datacenter Edition for Itanium-Based Systems
- Microsoft Windows Server 2003, Datacenter x64 Edition
- Microsoft Windows Server 2003, Enterprise Edition
- Microsoft Windows Server 2003, Enterprise Edition for Itanium-based Systems
- Microsoft Windows Server 2003, Enterprise x64 Edition
- Microsoft Windows Server 2003, Standard Edition (32-bit x86)
- Microsoft Windows Server 2003, Standard x64 Edition
- Microsoft Windows Server 2003, Web Edition
- Microsoft Windows XP Professional for Itanium-based systems
- Microsoft Windows XP Professional for Itanium-based systems
- Microsoft Windows XP Professional for Itanium-based systems
- Microsoft Windows XP Home Edition
- Microsoft Windows XP Home Edition for Prepaid Computers
- Microsoft Windows XP Home Edition for Subscription Computers
- Microsoft Windows XP Media Center Edition 2002
- Microsoft Windows XP Media Center Edition 2002
- Microsoft Windows XP Media Center Edition 2004
- Microsoft Windows XP Media Center Edition 2005
- Microsoft Windows XP Media Center Edition 2005 Update Rollup 2
- Microsoft Windows XP Service Pack 2
- Microsoft Windows XP Professional
- Microsoft Windows XP Professional 64-Bit Edition (Itanium)
- Microsoft Windows XP for Itanium-based Systems Version 2003
- Microsoft Windows XP Service Pack 2
- Microsoft Windows XP Professional x64 Edition
- Microsoft Windows XP Service Pack 1
- Microsoft Windows XP Service Pack 1a
- Microsoft Windows XP Service Pack 2
- Microsoft Windows XP Service Pack 3
- Microsoft Windows XP Starter Edition
- Microsoft Windows XP Tablet PC Edition
- Microsoft Windows XP Tablet PC Edition 2005
- Microsoft Windows XP Service Pack 2
- Windows Vista Enterprise 64-bit Edition
- Windows Vista Home Basic 64-bit Edition
- Windows Vista Home Premium 64-bit Edition
- Windows Vista Ultimate 64-bit Edition
- Windows Vista Business
- Windows Vista Enterprise
- Windows Vista Home Basic
- Windows Vista Home Premium
- Windows Vista Starter
- Windows Vista Ultimate
This article was previously published under Q132465
SUMMARY
Most print devices now support bi-directional communications in a local area network (LAN) to provide feedback to print servers. This information is used in various dialog boxes (for example, for printer status and current job information). In Windows NT, bi-directional communication between a print device and a print server over the network can be accomplished if the following conditions are met:
- The print device can signal back to the print server (it is a PJL-compatible print device).
- You are using a communication channel or network protocol that can carry the signal.
- The print server is using the Windows NT Hewlett-Packard (HP) Network Print Monitor (HPMON) that expects the signal.
MORE INFORMATION
PJL-Compatible Print Device
When communicating with HP's Printer Job Language (PJL) compatible print device (such as an HP LaserJet IIISi or HP4-series print device) the printer driver embeds a PJL command in the data stream that causes the print device to send a signal back to the print server. The signal notifies the server when the page has finished printing. If the print device understands PJL, bi-directional printing communication over the network is possible (HPMON must be used in Windows NT). If your print device does not recognize PJL, you must create a print monitor for Windows NT that can accept a signal sent from the print device.
Network Protocol
Most network protocols support bi-directional printing. Networks protocols such as the AppleTalk protocol and Data Link Control (DLC) protocol can provide bi-directional communication in Windows NT. Although TCP/IP can carry the signal, the Line Printer Remote (LPR) specification has no facility for this signal. Therefore, the Windows NT TCP/IP protocol does not support network bi-directional printing.
HPMON
One of the Windows NT Print Monitors, HPMON, supports bi-directional printing over the network. HPMON uses one of its features called "Advanced Job Status" for detecting a response signal sent from the print device. This feature is disabled by default. To enable this feature:
- From the Print Manager Printer menu, choose Properties.
- Choose Settings.
- Choose Port.
- Select the Advanced Job Status check box.
- Quit Print Manager.
NOTE: When the HPMON is active, print jobs are not removed from the print queue unless the print device understands PJL. If the print device does not respond with a signal to the print server, HPMON informs Print Manager that the print job is not complete.
Additional query words: prodnt 3.10 4.0 nic domain
Keywords: kbinfo KB132465
