Incorrect Top Margin with Citizen Dot-Matrix Printers |
Q119597
The information in this article applies to:
- Microsoft Windows 95
SYMPTOMS
Printing to a Citizen dot-matrix printer results in a larger top margin than set in the application.
CAUSE
The Citizen drivers, like other Windows 95 dot-matrix drivers, default to an unprintable top of 0 inches for tractor feed. Most Citizen printers, however, have the factory default top-of-form set to 1 inch. This causes the printing from Windows 95 to be shifted 1 inch down the page.
RESOLUTION
Go to the Properties settings for the Citizen printer. On the paper property tab, click the "Unprintable Area..." button. Set the unprintable top setting to 1000. (The setting is in 1/1000ths of an inch).
MORE INFORMATION
If you are using a sheet-feeder, make sure to set the paper source to "Sheet-Feeder...", then click the "Unprintable Area..." button and click the "Defaults" button in the Unprintable Area dialogue. This will correctly set the default unprintable regions for the sheet-feeder.
Most of the Citizen printers have a customizable top-of-form setting for the push tractor feeder. If you have changed this setting to something other than 1 inch, you will need to adjust the unprintable top setting in the Paper properties tab accordingly. For example, if you have set your top- of-form to .5 inch on the printer, you will need to set the unprintable top setting to 500. For more information on setting the top-of-form on your printer, refer to your printer's manual.
Additional query words: gsx 240 140 plus + 220 130 145 190 230 245 esc/P2 Swift 200 24 e x
Keywords :
Issue type :
Technology : kbWin95search kbWin95
Last Reviewed: December 15, 2000 |
