WFWG: Err Msg: Invalid Keyword/Argument. Check Configuration.

Last reviewed: November 21, 1994
Article ID: Q92874

The information in this article applies to:

Microsoft Windows for Workgroups versions 3.1, 3.11

SYMPTOMS

When you use the Windows Driver Library (WDL) driver for the Racal Interlan AT network interface card (NIC), RACAL.EXE, you may receive the following error message:

   Invalid keyword/argument. Check configuration.

WORKAROUND

To correct this problem, locate the entry below in PROTOCOL.INI

   [MS$ILANAT_NIF]
   Drivername=NP600$

and modify it to read

   [MS$ILANAT_NIF]
   Drivername=ILANAT$

NOTE: Each time you change network settings in Control Panel, this entry is reset to the incorrect value. You must modify PROTOCOL.INI each time you change network settings.

KBCategory: kbnetwork kb3rdparty kberrmsg

KBSubcategory: wfw wfwg
Additional reference words: 3.10 3.11

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Microsoft KB Archive/92874

WFWG: Err Msg: Invalid Keyword/Argument. Check Configuration.

SYMPTOMS

WORKAROUND