Windows Longhorn Build 5048 full DWM
Windows Longhorn Build 5048 full DWM
How to get full DWM in Longhorn 5048 without any crash or error.
Go to Start-Run type services.msc and hit OK. Look for User Experience Session Management Service, set it to Automatic.
Open regedit and scrool to HKLM/software/microsoft/ and create a new key, DWM. Open that key and create these dwords:
EnableMachineCheck - set it to 0
Glass -set it to 1
Metal -set it to 0
UseAlternateButtons -set to 0
ForceSoftwareD3D (BE SURE TO SET IT CORRECTLY OR DWM WILL CRASH EXPLORER.EXE AND FREZE DISPLAY OR GET A BLANK SCREEN)-set to 0 if on VMWare, if on VPC or an old pc etc. set it to 1 or DWM will crash.
Now open notepad and type rundll32.exe udwm.dll DwmClientStartup. Save the file as DWM.bat ,file type "All files" and put it to the startup folder.
Restart the PC or VM and you will get DWM.
http://www.betaarchive.com/imageupload/ ... r.1606.png
NOTE: Don't use VirtualBox, it isn't compatible with DWM. And if you are trying it on a PC with a LDDM driver, then skip the registry editing part. And sometimes animations don't work, if so restart the PC or VM.
Go to Start-Run type services.msc and hit OK. Look for User Experience Session Management Service, set it to Automatic.
Open regedit and scrool to HKLM/software/microsoft/ and create a new key, DWM. Open that key and create these dwords:
EnableMachineCheck - set it to 0
Glass -set it to 1
Metal -set it to 0
UseAlternateButtons -set to 0
ForceSoftwareD3D (BE SURE TO SET IT CORRECTLY OR DWM WILL CRASH EXPLORER.EXE AND FREZE DISPLAY OR GET A BLANK SCREEN)-set to 0 if on VMWare, if on VPC or an old pc etc. set it to 1 or DWM will crash.
Now open notepad and type rundll32.exe udwm.dll DwmClientStartup. Save the file as DWM.bat ,file type "All files" and put it to the startup folder.
Restart the PC or VM and you will get DWM.
http://www.betaarchive.com/imageupload/ ... r.1606.png
NOTE: Don't use VirtualBox, it isn't compatible with DWM. And if you are trying it on a PC with a LDDM driver, then skip the registry editing part. And sometimes animations don't work, if so restart the PC or VM.
Last edited by ovctvct on Thu Nov 26, 2015 3:38 pm, edited 20 times in total.
-
WindowsNeptune
- Donator
- Posts: 442
- Joined: Thu Dec 20, 2012 1:13 pm
- Location: Earth
Re: Windows Longhorn Build 5048 stable DWM
I'm now installing 5048 and I will try what you say.
I want to ask you a question: How did you find it? I mean, why do you know that by setting these keys the DWM will work? You just try some keyword or searched in system and found sth about it?
Thank you!
I want to ask you a question: How did you find it? I mean, why do you know that by setting these keys the DWM will work? You just try some keyword or searched in system and found sth about it?
Thank you!
Re: Windows Longhorn Build 5048 stable DWM
I tried it on my old pc and on VMware and it worked.
Re: Windows Longhorn Build 5048 stable DWM
And I found that keys on the Internet but it was crashing initially(only on my old PC). Then I found the ForceSoftwareD3D key, I set it to 1 and it was finally stable and working.
-
Antagonista
- Posts: 13
- Joined: Mon Apr 08, 2013 12:26 am
- Location: Minas Gerais, Brazil
Re: Windows Longhorn Build 5048 stable DWM
This is interesting, I had the same problem times ago. thx.
Win 7 Ultimate - SP1 Brazilian Portuguese/Intel HD Graphics 1,5GB/4GB RAM/Intel Celeron 847 1,1GhZ
-
The Outsider
- Posts: 2
- Joined: Thu Jun 19, 2014 11:03 pm
Re: Windows Longhorn Build 5048 stable DWM
I did this and got black boxes around windows and some animations didn't work.
But this is the most stable build i found that works almost perfectly on my desktop.
But this is the most stable build i found that works almost perfectly on my desktop.
Never, never bother a Terminator!
Re: Windows Longhorn Build 5048 stable DWM
Did you use VMware or an old pc?The Outsider wrote:I did this and got black boxes around windows and some animations didn't work.
But this is the most stable build i found that works almost perfectly on my desktop.
-
The Outsider
- Posts: 2
- Joined: Thu Jun 19, 2014 11:03 pm
Re: Windows Longhorn Build 5048 stable DWM
I used my physical computer.ovctvct wrote:Did you use VMware or an old pc?The Outsider wrote:I did this and got black boxes around windows and some animations didn't work.
But this is the most stable build i found that works almost perfectly on my desktop.
And used WinXP x64 drivers since there are no LDDM drivers for my card.
Never, never bother a Terminator!
Re: Windows Longhorn Build 5048 stable DWM
thats why you disable hardware check via registry
and it will use CPU for DWM and animations since ... again at the time many gpu's were not supported
and it will use CPU for DWM and animations since ... again at the time many gpu's were not supported
Re: Windows Longhorn Build 5048 stable DWM
Exactly, as there are no LDDM drivers for most GPUs, including VMware, graphics cards like Radeon 9600 and 9800 are the only ones that support LDDM.wasabilee wrote:thats why you disable hardware check via registry
and it will use CPU for DWM and animations since ... again at the time many gpu's were not supported
Re: Windows Longhorn Build 5048 stable DWM
Works great in VMware! I now have this and 4074 working perfectly in VMware 7.1.4. (if only I could get my favorite build, 4039, working on VMware) What does use alternate buttons do?
Re: Windows Longhorn Build 5048 stable DWM
It makes the Close, Minimize/Restore and Maximize look like this: http://www.betaarchive.com/wiki/images/ ... 048DWM.pngmrcobra92 wrote:Works great in VMware! I now have this and 4074 working perfectly in VMware 7.1.4. (if only I could get my favorite build, 4039, working on VMware) What does use alternate buttons do?
Re: Windows Longhorn Build 5048 stable DWM
Those look like the buttons on 4039 when DWM is active, interesting.ovctvct wrote:It makes the Close, Minimize/Restore and Maximize look like this: http://www.betaarchive.com/wiki/images/ ... 048DWM.pngmrcobra92 wrote:Works great in VMware! I now have this and 4074 working perfectly in VMware 7.1.4. (if only I could get my favorite build, 4039, working on VMware) What does use alternate buttons do?
Re: Windows Longhorn Build 5048 stable DWM
Weird... I had to set ForceSoftwareD3D to 1 in VMWare... Is it because of missing drivers? Also had to reset when changing resolution... However good tutorial! Got DWM after all
Re: Windows Longhorn Build 5048 stable DWM
Is it normal for the animations to not work at all in VirtualBox?
Re: Windows Longhorn Build 5048 stable DWM
no they don'tmrcobra92 wrote: Those look like the buttons on 4039 when DWM is active, interesting.
they are even not the same at all
Re: Windows Longhorn Build 5048 stable DWM
ForceSoftwareD3D is unnecessary in 5048.
//We are Amanda~
using Amanda.Carolina;
using Amanda.Carolina;
Re: Windows Longhorn Build 5048 stable DWM
Yes it is. Virtual Box is incompatible with DWM. Use VMware.least1234 wrote:Is it normal for the animations to not work at all in VirtualBox?
Re: Windows Longhorn Build 5048 stable DWM
rafaelgs wrote:ForceSoftwareD3D is unnecessary in 5048.
Last edited by ovctvct on Mon Jul 21, 2014 12:06 pm, edited 1 time in total.
-
Lukas Marsik
- Posts: 1268
- Joined: Thu Mar 29, 2012 4:14 pm
Re: Windows Longhorn Build 5048 stable DWM
It isn't. All you need is the UXSMS service to work properly which is also easy to fix, will place a tutorial here on how to do it later.ovctvct wrote:No, it is necessary if you are trying to get DWM on VirtualPC or an older PC without a LDDM graphics card, otherwise DWM crashes.
- somerandompep
- Posts: 46
- Joined: Fri Sep 20, 2019 6:31 pm
Re: Windows Longhorn Build 5048 full DWM
I installed VMware SVGA 3D Version 7.0 (WDDM) and only added Glass and Metal registry keys and it worked. Thanks! Nice tutorial.
And writing rundll32.exe udwm.dll DwmClientStartup would keep the cmd window open because rundll32.exe always run in background and that command will wait until it stops, using start rundll32.exe udwm.dll DwmClientStartup would fix the problem.
And writing rundll32.exe udwm.dll DwmClientStartup would keep the cmd window open because rundll32.exe always run in background and that command will wait until it stops, using start rundll32.exe udwm.dll DwmClientStartup would fix the problem.
- Kimberly5384
- Posts: 137
- Joined: Mon Oct 29, 2018 2:07 am
- Contact:
Re: Windows Longhorn Build 5048 full DWM
I'm using vmware 10. Will this tutorial work?
Legends say if you read this signature, you'll come across good fortune. Lucky you!
- somerandompep
- Posts: 46
- Joined: Fri Sep 20, 2019 6:31 pm
Re: Windows Longhorn Build 5048 full DWM
I'm using VMware 15.5. You can get VMware driver packs that are capable for Longhorn and how to install SVGA drivers at https://longhorn.ms/installing-drivers/
Re: Windows Longhorn Build 5048 full DWM
I've gotten DWM to work on this Build on VMware 10. it worked perfectly fine.
-
Applegame12345
- Posts: 207
- Joined: Sun Dec 13, 2015 6:14 am
- Location: C:\Users\Applegame12345