Microsoft KB Archive/92780

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 17:34, 18 July 2020 by 3155ffGd (talk | contribs) (importing KB archive)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Knowledge Base


WFWG Setup Modifies Wrong Lines in CONFIG.SYS File

Article ID: 92780

Article Last Modified on 10/13/2003



APPLIES TO

  • Microsoft Windows for Workgroups 3.1
  • Microsoft Windows for Workgroups 3.11



This article was previously published under Q92780

SYMPTOMS

Microsoft Windows for Workgroups Setup may ignore REM statements in the CONFIG.SYS file. If you are using a utility such as Bootcon, this can create configuration problems because Bootcon uses REMs to delimit multiple boot configurations. Windows for Workgroups Setup may inadvertently modify the wrong configuration. For example, Setup may change the path of the Microsoft LAN Manager Net command to the Windows for Workgroups directory.

WORKAROUND

To avoid this problem, back up CONFIG.SYS before you install Windows for Workgroups. After installation, you may need to edit the CONFIG.SYS file to ensure Windows for Workgroups drivers and other network drivers are correctly loaded under the proper boot configuration.

As an alternative, you can upgrade to MS-DOS 6.2 and use the Multi-Config feature instead of Bootcon.

STATUS

Microsoft has confirmed this to be a problem in Windows for Workgroups version 3.1 and version 3.11. We are researching this problem and will post new information here as it becomes available.


Additional query words: 3.10 3.11 wfwfest multi-boot multi-config

Keywords: KB92780