Microsoft KB Archive/883970

From BetaArchive Wiki
Knowledge Base


Frequently asked questions about Microsoft Bluetooth-enabled devices

Article ID: 883970

Article Last Modified on 3/7/2007


APPLIES TO

  • Microsoft IntelliPoint 6.1
  • Microsoft IntelliPoint 6.0
  • Microsoft IntelliPoint 5.2
  • Microsoft Wireless Entertainment Desktop 7000
  • Microsoft Wireless IntelliMouse Explorer for Bluetooth
  • Microsoft Intellimouse 2.00 Bluetooth
  • Microsoft Wireless Laser Mouse 8000
  • Microsoft Wireless Notebook Presenter Mouse 8000
  • Microsoft Wireless Optical Desktop for Bluetooth


INTRODUCTION

This article contains answers to questions that customers ask frequently about Microsoft devices that are Bluetooth enabled.


MORE INFORMATION

Q1: What Bluetooth-enabled devices can I connect to the Microsoft Bluetooth-enabled universal serial bus (USB) transceiver?

A1: The Microsoft Bluetooth-enabled USB transceiver works with other Bluetooth-enabled devices if the other devices have passed the Bluetooth certification for the following profiles that are defined by the Bluetooth Special Interest Group (SIG):

  • The Human Interface Device profile
  • The Hard Copy Cable Replacement profile
  • The Dial-up Networking profile
  • The Serial Port profile
  • The Object Push profile
  • The Personal Area Networking (PAN) profile

back to the top

Q2: I bought a Wireless Optical Desktop for Bluetooth when this product was introduced. How do I obtain the new profile support?

A2: To obtain the new profiles, you must download and then install Microsoft Windows XP Service Pack 2. To download Windows XP Service Pack 2, visit the following Microsoft Web site:

http://www.microsoft.com/windowsxp/downloads/default.mspx


back to the top

Q3: What if I want to use your hardware products with different Bluetooth-enabled software and with my internal Bluetooth-enabled radio?

A3: Microsoft hardware products can only be guaranteed to work with the Bluetooth support in Windows XP Service Pack 2. The basic functionality of the Microsoft hardware may work if the other Bluetooth-enabled software has passed the Bluetooth certification for the following profiles that are defined by the Bluetooth SIG:

  • The Human Interface Device profile
  • The Hard Copy Cable Replacement profile
  • The Dial-up Networking profile
  • The Serial Port profile
  • The Object Push profile
  • The Personal Area Networking (PAN) profile

For more information, contact the manufacturer of the other software to determine whether that manufacturer has tested their software with the Microsoft hardware devices.

back to the top

Q4: I have a computer that has Bluetooth built in. Can I use the Microsoft Bluetooth-enabled keyboard and mouse without using the USB transceiver?

A4: You might have this question if you have a portable computer that is Bluetooth-enabled. The Wireless Optical Desktop for Bluetooth includes the USB transceiver because few desktop computers support Bluetooth. If your computer has Bluetooth built in and if your computer has the Human Interface Device profile, you may be able to connect the Bluetooth-enabled keyboard and mouse directly. If you want to use a specific internal Bluetooth-enabled radio, contact the manufacturer of your portable computer to determine whether the internal Bluetooth-enabled radio is supported by Windows XP Service Pack 2. Over time, this issue may disappear as manufacturers offer newer radio firmware.

back to the top

Q5: Why did Microsoft ActiveSync over a Bluetooth connection only work one time?

A5: If you unplug the computer or if you suspend the computer, you might interrupt the ActiveSync synchronization. Restart the computer with the USB transceiver plugged in.

back to the top

Q6: Why does ActiveSync not let me make a Bluetooth connection?

A6: You may have to reset your COM ports if you have added too many serial port devices or too many Serial Port profile devices. To do this, follow these steps:

  1. Open Device Manager. To do this in Windows Vista, click Start[GRAPHIC: the Start button], type device in the Start Search box, and then click Device Manager in the Programs list.


[GRAPHIC: User Account Control permission] If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.

To open Device Manager in Windows XP, click Start, click Run, type devmgmt.msc, and then click OK.

  1. Expand Ports, right-click the Standard Serial over Bluetooth link port for your outgoing connection, and then click Properties.
  2. Click Advanced on the Port Settings tab, click COM8 in the COM Port Number box, and then click OK.
  3. Right-click the Standard Serial over Bluetooth link port for your outgoing connection, and then click Properties.
  4. Click Advanced on the Port Settings tab, click COM9 in the COM Port Number box, and then click OK.
  5. Quit Device Manager.
  6. Open Windows Mobile Device Center. To do this in Windows Vista, click Start[GRAPHIC: Start button], type Windows Mobile in the Start Search box, and then click Vista Mobile Device Center in the Programs list.


To open Microsoft ActiveSync in Windows XP, click Start, click Run, type wcesmgr.exe, and then click OK.

  1. On the File menu, click Connection Settings.
  2. In the Allow serial cable or infrared connection to this COM port box, click COM9, and then click OK.

back to the top

Keywords: kbtshoot kbinfo KB883970



Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.


Retrieved from ‘https://www.betaarchive.com/wiki/index.php?title=Microsoft_KB_Archive/883970&oldid=259966’
the Creative Commons 3.0 ShareAlike (except the Microsoft KB Archive).
Powered by MediaWiki