Microsoft KB Archive/835933

From BetaArchive Wiki

Article ID: 835933

Article Last Modified on 7/24/2007



APPLIES TO

  • Microsoft Windows Server 2003, Web Edition
  • Microsoft Windows Server 2003, Standard Edition (32-bit x86)
  • Microsoft Windows Server 2003, Enterprise Edition (32-bit x86)
  • Microsoft Windows Server 2003, Datacenter Edition (32-bit x86)
  • Microsoft Windows Server 2003, Enterprise x64 Edition
  • Microsoft Windows Server 2003, 64-Bit Datacenter Edition




SYMPTOMS

When you try to print through a Microsoft Windows Server 2003-based print server, and the print queue indicates that the printer is out of paper, the print queue takes a long time to change from the Out of Paper status to the Ready status after you add paper to the printer.

You may notice this problem because there are long delays for print jobs that are sent to the printer. The print jobs remain in the queue until the print queue status changes to Ready.

CAUSE

This problem may occur when the following conditions are true:

  • Your Windows Server 2003-based computer uses the standard port monitor to control the ports for several TCP/IP printers.
  • The TCP/IP printer ports have Simple Network Management Protocol (SNMP) status enabled.

When the standard port monitor prints to a TCP/IP printer, the standard port monitor uses SNMP to read the configuration of the target printer and to determine the status of the target printer. When the standard port monitor controls many printer ports, the polling scheme for the SNMP status of these printer ports is inefficient. The number of standard TCP/IP ports on a print server directly affects SNMP performance. The more ports there are, the longer it takes to clear an SNMP print-blocking error. Additionally, the standard port monitor waits for blocking SNMP API calls to time out for each unresponsive printer.

RESOLUTION

Hotfix information

A supported hotfix is now available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next service pack that contains this hotfix.

To resolve this problem, submit a request to Microsoft Online Customer Services to obtain the hotfix. To submit an online request to obtain the hotfix, visit the following Microsoft Web site:

Note If additional issues occur or any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. To create a separate service request, visit the following Microsoft Web site:

Prerequisites

No prerequisites are required.

Restart requirement

You must restart your computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace any other hotfixes.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows Server 2003, 32-bit editions
Date         Time   Version            Size    File name
--------------------------------------------------------------
02-Jun-2004  16:21  5.2.3790.178       14,336  Mgmtapi.dll      
02-Jun-2004  16:21  5.2.3790.178       16,896  Tcpmib.dll       
02-Jun-2004  16:21  5.2.3790.178       46,592  Tcpmon.dll       
02-Jun-2004  16:21  5.2.3790.178       43,520  Tcpmonui.dll     
02-Jun-2004  16:21  5.2.3790.178       41,472  Wsnmp32.dll
Windows Server 2003, 64-bit editions
Date         Time   Version            Size    File name        Platform
------------------------------------------------------------------------
02-Jun-2004  16:17  5.2.3790.178       42,496  Mgmtapi.dll      IA-64
02-Jun-2004  16:17  5.2.3790.178       42,496  Tcpmib.dll       IA-64
02-Jun-2004  16:17  5.2.3790.178      142,336  Tcpmon.dll       IA-64
02-Jun-2004  16:17  5.2.3790.178      105,984  Tcpmonui.dll     IA-64
02-Jun-2004  16:17  5.2.3790.178      116,224  Wsnmp32.dll      IA-64
02-Jun-2004  16:21  5.2.3790.178       14,336  Wmgmtapi.dll     x86
02-Jun-2004  16:21  5.2.3790.178       16,896  Wtcpmib.dll      x86
02-Jun-2004  16:21  5.2.3790.178       46,592  Wtcpmon.dll      x86
02-Jun-2004  16:21  5.2.3790.178       43,520  Wtcpmonui.dll    x86
02-Jun-2004  16:21  5.2.3790.178       41,472  Wwsnmp32.dll     x86

WORKAROUND

To work around this problem, turn off SNMP port status for the print queues. To do this, follow these steps:

  1. Click Start, and then click Printers and Faxes.
  2. Right-click the printer, and then click Properties.
  3. Click the Ports tab.
  4. Click Configure Port.
  5. Click to clear the SNMP Status Enabled check box, click OK, and then click Close.


STATUS

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

MORE INFORMATION

For additional information, click the following article number to view the article in the Microsoft Knowledge Base:

824684 Description of the standard terminology that is used to describe Microsoft software updates



Additional query words: SPM TCPmon SNMP polling

Keywords: kbhotfixserver kbqfe kbhotfixserver kbqfe kbfileprintservices kbbug kbfix kbqfe kbwinserv2003presp1fix KB835933