Microsoft KB Archive/831770

From BetaArchive Wiki

Article ID: 831770

Article Last Modified on 2/5/2007



APPLIES TO

  • Microsoft Broadband Networking Wireless Base Station MN-700
  • Microsoft Broadband Networking Wireless Base Station MN-700
  • Microsoft Broadband Networking Wireless Desktop Kit MN-840
  • Microsoft Broadband Networking Wireless Notebook Adapter MN-720
  • Microsoft Broadband Networking Wireless Notebook Adapter MN-720
  • Microsoft Broadband Networking Wireless Notebook Kit MN-820
  • Microsoft Broadband Networking Wireless Notebook Kit MN-820
  • Microsoft Broadband Networking Wireless PCI Adapter MN-730
  • Microsoft Broadband Networking Wireless USB 2.0 Adapter MN-710




SUMMARY

This step-by-step article describes how to troubleshoot problems connecting to a Microsoft Broadband wireless network.

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.
back to the top

MORE INFORMATION

Verify that your wireless adaptor is installed correctly

  1. Open Device Manager. To do this in Windows Vista, click Start[GRAPHIC: the Start button], type device in the Start Search box, and then click Device Manager in the Programs list.


[GRAPHIC: User Account Control permission] If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.

To open Device Manager in Windows XP, click Start, click Run, type devmgmt.msc, and then click OK.

  1. Expand Network Adapters, and then verify that your wireless adaptor is displayed. If your wireless adaptor is not displayed, one or more of the following issues may be causing the problem:
    • A wireless network adaptor may not be physically present. You must install a wireless network adaptor before you can connect to a wireless network.
    • Your wireless adaptor may not be connected correctly. Turn off your computer, and then remove and reconnect your adaptor.
    • If your adaptor is a USB adaptor, there may be a problem with the USB ports on your computer. Test your USB ports by connecting to a different USB device such as a USB mouse. Verify that the USB ports work correctly. If you have multiple USB devices on your computer, disconnect any devices that you do not need.
  2. Verify that your wireless network adaptor appears with a yellow exclamation mark or a red "X".
    • A yellow exclamation mark indicates that there is a problem with the device.
    • A red "X" indicates that the device is disabled. Right-click the device, and then click Enable.
  3. Double-click your wireless network adaptor. On the General tab, verify that the device is functioning correctly.

back to the top

Verify that the wireless network is available

Note If your wireless adaptor is an integrated device such as a built-in wireless networking adaptor in a portable computer, you may have to turn it on by using a switch or a keyboard shortcut. See your computer's documentation, Help files, or technical support department.

  1. Open Network Connections. To do this in Windows Vista, click Start[GRAPHIC: the Start button], type Network Connections in the Start Search box, and then click Network Connections in the Programs list.


[GRAPHIC: User Account Control permission] If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.

To open Network Connections in Windows XP, click Start, click Run, type ncpa.cpl, and then click OK.

  1. Right-click your wireless adaptor, and then click View Available Wireless Networks.
  2. Under Available wireless networks, verify that your network name (SSID) is displayed.
    • If your wireless network name is displayed, but you cannot connect to the network, one or more of the following conditions may be true:
      • The wireless security (WEP) settings on your computer may not be configured with the same information as your network. See the "Check the wireless security settings" section.
      • There may be a problem with the configuration of your wireless access point.
      • There may be a conflict between your wireless adaptor and another network adaptor on your computer. See the "Look for conflicts with other network adaptors" section.
    • If your wireless network name is not displayed, one or more of the following conditions may be true:
      • The wireless network may not be present.
      • The wireless access point may be configured not to broadcast the SSID.
      • There may be a problem with your wireless access point. Check all connections, and make sure that the power is on.
      • There may be a conflict between your wireless adaptor and another network adaptor on your computer. See the "Look for conflicts with other network adaptors" section.

back to the top

Install the latest firmware update

Download and install the latest firmware upgrade.
For additional information about how to update the firmware on your base station, click the following article number to view the article in the Microsoft Knowledge Base:

814445 MSBBN: How to update the firmware on your Microsoft Broadband Networking device


Configure the wireless network settings on the base station

Change the wireless channel number

When you change the wireless channel number, your network may be able to communicate on a channel with less interface. To set the wireless channel for base station, follow these steps:

  1. Start the Microsoft Broadband Network Utility.
  2. On the Tools menu, click Management Tool.
  3. When you are prompted to, log on to the base station. To do this, use the password that you created when you ran the Setup Wizard the first time. If you did not run the Setup Wizard, use the following default base station password:

    admin

  4. Click Wireless.
  5. Click to select the Enable wireless access check box if it is not already selected.
  6. Click the channel number that you want to use in the Wireless channel number list.
  7. Click Apply.

Note Channels 1, 6, and 11 are the preferred channels for wireless networking.

Reduce the data rate

When you reduce the data rate on your wireless network, it may create a more stable connection. To do this, follow these steps:

  1. Start the Microsoft Broadband Network Utility.
  2. On the Tools menu, click Management Tool.
  3. When you are prompted to, log on to the base station. To do this, use the password that you created when you ran the Setup Wizard the first time. If you did not run the Setup Wizard, use the following default base station password:

    admin

  4. Click Wireless.
  5. Click to select the Enable wireless access check box if it is not already selected.
  6. Change the data rate that your wireless network uses to a lower number. If your data setting is auto, first try 5, and then try lower settings if you have to.
  7. Click Apply.

If these steps resolve the problem, you may have a wireless signal quality or signal interference problem. Signals that are transmitted between the base station and a wireless adaptor can be affected by interference from other wireless devices—including 2.4 gigahertz (GHz) cordless phones, microwave ovens, and neighboring wireless networks. Move the other devices farther from your wireless networking hardware as needed, and do not use them while you are using the network.

For additional information about how to resolve wireless signal-strength problems, click the following article number to view the article in the Microsoft Knowledge Base:

812469 MSBBN: Signal strength displayed in the Microsoft Broadband Network Utility is lower than you expect


Configure the wireless network settings on your computer

  1. Try to automatically repair the settings. To do this, follow these steps:
    1. Open Network Connections. To do this in Windows Vista, click Start[GRAPHIC: the Start button], type Network Connections in the Start Search box, and then click Network Connections in the Programs list.

      [GRAPHIC: User Account Control permission] If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.

      To open Network Connections in Windows XP, click Start, click Run, type ncpa.cpl, and then click OK.
    2. Right-click your wireless adaptor, and then click Repair.
    3. Test your connection.
  2. Manually type the network name (SSID). To do this, follow these steps:
    1. In Network Connections, right-click your wireless adaptor, and then click Properties.
    2. Click the Wireless networks tab, and then click to select the Use Windows to configure my wireless network settings check box.
    3. Under Available networks, click your wireless network, and then click Configure.

      If your wireless network is not displayed, see the "Verify that the wireless network is available" section.
    4. Click the Association tab, and then type the correct network name next to Network name (SSID), click OK, and then click OK again.
    5. Test your connection.
  3. Manually set the wireless channel number. To do this, follow these steps:
    1. In Network Connections, right-click your wireless adaptor, click Properties, click Configure under your wireless network adaptor, and then click the Advanced tab.
    2. Under Property, click IBSS channel number, and then type the channel that your wireless network uses in the Value box.

      You can find the channel number by using the administration tool for your wireless access point. Do not change this value unless you are sure of the channel that your network uses.
    3. Test your connection.
  4. Examine the TCP/IP settings for your wireless network adaptor. To do this, follow these steps:
    1. In Network Connections, right-click your wireless adaptor, click Properties, and then click the General tab.
    2. Double-click Internet Protocol (TCP/IP) under This connection uses the following items.
    3. Use one of the following methods:
      • If your wireless network is configured to assign the IP address and DNS server information automatically (most common), click both of the following options:
        • Obtain an IP address automatically
        • Obtain DNS server address automatically
      • If your wireless network is configured to use specific IP address and DNS server information (advanced), configure that information about this tab.

        Note This kind of configuration would have been set up by the person who configured your wireless network. Most wireless networks are automatically configured.

back to the top

Examine the wireless security settings

When wireless security is configured on a wireless network, a user who does not have the correct wireless security information configured on his or her computer is prevented from connecting. To determine whether a problem with these settings is preventing you from connecting, temporarily disable wireless security on your network, and then try to connect. To do this, follow these steps.

Note Disabling wireless security can cause your network to become more vulnerable. Only perform this procedure if you understand the security implications of doing this. This is intended as a temporary measure to help you identify a problem.

  1. Disable wireless security on your wireless access point. To disable wireless security on a Microsoft Broadband Networking Wireless Base Station, follow these steps:
    1. On the Home page of the Base Station Management Tool, click Security.
    2. On the Security menu, click Wireless Security
    3. Under Security and Encryption, click Disable wireless security, and then click Apply.


    For information about how to disable wireless security on a third-party wireless access point, see the product document, Help files, or contact the manufacturer's technical support department.
  2. Try to connect to your wireless network.

If you can connect after you disable wireless security, the wireless security settings on your computer may have been different from those configured on your access point. Reconfigure the wireless security settings on your wireless network and all wireless network computers to make sure that the same settings are used on the access point and each wireless client.

back to the top

Look for conflicts with other network adaptors

Disable any network adaptors on your computer, except the wireless adaptor that you want to use to connect to your wireless network. To do this, follow these steps:

  1. Open Device Manager. To do this in Windows Vista, click Start[GRAPHIC: the Start button], type device in the Start Search box, and then click Device Manager in the Programs list.


[GRAPHIC: User Account Control permission] If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.

To open Device Manager in Windows XP, click Start, click Run, type devmgmt.msc, and then click OK.

  1. Expand Network Adapters.
  2. Right-click the network adaptor that you want to disable, and then click Disable.
  3. Repeat step 3 for any other unnecessary network adaptors that are displayed.
  4. Try to connect to your wireless network.

For additional information about how to troubleshoot a wireless network connection, click the following article number to view the article in the Microsoft Knowledge Base:

313242 How to troubleshoot wireless network connections in Windows XP


For additional information about how to troubleshoot general connection issues, click the following article number to view the article in the Microsoft Knowledge Base:

812951 MSBBN How to troubleshoot connection problems


The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products. To learn more about how to troubleshoot network connections in Windows Vista, follow the instructions in the "Troubleshoot network and Internet connection problems" topic in Windows Vista Help and Support. To view the topic, follow these steps:

  1. Click Start [GRAPHIC: Start button], and then click Help and Support.
  2. In the Search Help box, type Troubleshoot network and Internet connection problems, and then click Search Help.
  3. Click the appropriate topic.

back to the top

Keywords: kbhowtomaster kbprb KB831770