Microsoft KB Archive/50566

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 18:24, 12 August 2020 by X010 (talk | contribs) (X010 moved page Microsoft KB Archive/Q50566 to Microsoft KB Archive/50566 without leaving a redirect: Text replacement - "Microsoft KB Archive/Q" to "Microsoft KB Archive/")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Works 2.00: Compaq Gas Plasma Display Is Blank

PSS ID Number: Q50566 Article last modified on 06-12-1996

2.00

MS-DOS

SUMMARY

The Compaq gas plasma screen must be set to CGA mode for Works version 2.00 to display properly. If this setting is not correct, Works will come up with a blank screen and hang the system.

The following are two ways to place the gas plasma display into a CGA mode:

  1. At the DOS prompt, type MODE SEL CGA.
  2. You can physically change the mode to CGA by setting the jumper on the Compaq video card to bridge pins 1 and 2 of jumper block E23.

KBCategory: kbother KBSubcategory: dworkskb Additional reference words:

============================================================================= Copyright Microsoft Corporation 1996.