Microsoft KB Archive/49816

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 18:24, 12 August 2020 by X010 (talk | contribs) (X010 moved page Microsoft KB Archive/Q49816 to Microsoft KB Archive/49816 without leaving a redirect: Text replacement - "Microsoft KB Archive/Q" to "Microsoft KB Archive/")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Flight Simulator Version 4.00 README.DOC PSS ID Number: Q49816 Article last modified on 04-02-1991 PSS database name: D_FltSim

4.00

MS-DOS

Summary:

The following information was taken from the Flight Simulator Version 4.00 README.DOC file.

More Information:

           ****************************************
           MICROSOFT FLIGHT SIMULATOR  Version 4.00
                  R E L E A S E    N O T E S
           ****************************************

This document contains information not found (or not correctly stated) in the “Microsoft Flight Simulator” information manual or navigation charts.

Navigation information

  1. The VOR frequency for Martha’s Vineyard is 108.2, not 108.7 as shown on the New York and Boston Area chart. 108.7 is the ILS frequency.
  2. The CT frequency for Fairchild is 122.8, not 112.8 as shown on the Seattle Area chart.
  3. The San Francisco and Oakland airport locations are slightly offset in the San Francisco and Oakland Area chart. Use VOR location as airport location.
  4. On some machines, the EFIS/CFPD will change color near the runway during ILS approaches. This indicates you have descended to “decision height”, the altitude at which you must decide whether to land the plane or abort the landing and “go around” for another landing attempt.
  5. When using some Microsoft-compatible scenery disks, the Dynamic Scenery items will not be displayed.
  6. SubLOGIC “Instant Facilities Locator” for Flight Simulator Version 3.00 can be used with Flight Simulator Version 4.00 if you have a hard disk system.

After running the program “HDSETUP” as indicated in Facilities Locator instructions, type the following at the DOS prompt to rename a file:

rename config.fs3 config.fs4 (then press the ENTER key).

After renaming the file, you will note the new “G Facilities Locator” option in the NAV/COM menu the next time you use Flight Simulator.

Multi-Player information

  1. If you are not using a Hayes-compatible modem, select Option 1 (ON- LINE), then deselect Option 1 prior to selecting Option 3 (Messages/Talk to Modem). Turning Option 1 on and off has the effect of initializing the COM port buffer, and should be done before you “Talk to Modem” without prior selection of “DIAL” or “Wait for Ring” options.
  2. If you are using a joystick, you may have problems running Multi- Player at a high baud rate (19,200 baud or higher), particularly in sending and receiving aircraft. If using a joystick, it is best to set your baud rate no higher than 9,600.
  3. In Multi-Player, a baud rate of 57,600 is supported, but is not recommended. Its advantage is faster aircraft send/receive and messages, but it has no effect upon the smoothness of the other player’s flight, and can degrade system performance.
  4. When sending messages, limit the length of the message to what is displayed in the message box.
  5. When using the Sailplane in Multi-Player, the ADF tracking feature is not available due to the reduced Sailplane instrumentation.
  6. Multi-Player supports two players, not “two or more” as noted on Page 132.

General Information

  1. For best results with the “FS4” demo, select Option “D. Neither” in the Environment Conditions menu during installation.

  2. When accelerating down the runway, do not press the DOWN ARROW key six times as suggested on Page 43. The Cessna will takeoff by itself.

  3. When using Flight Simulator on a 8086/8088 machine, use the following guidelines to enhance Flight Simulator performance:

    1. Use the Display Control menu to reduce the demand on display rates.
    2. Set Spot Plane Transition to “Fast” for quicker views of plane.
    3. Limit the use of multiple windows, Dynamic Scenery, and Weather items.
    4. Due to the complexity of the “FS4” demo, 8086/8088 machines may have difficulty running the demo for sustained periods of time.
  4. When using Flight Simulator with the OS/2 operating system, select the “A. 8086 or 8088” processor type when you install Flight Simulator.

    If you are using EGA display and switch from Flight Simulator to another application, and then return to Flight Simulator, prompt a refresh of the screen by one of the following methods:

    Press ESC, view a menu, then press SPACEBAR

    or

    reset the mode

  5. Some advanced features and multiple windows may not be available on 384K machines, depending on how the machine allocates video memory.

  6. When running from floppy disks the Logbook feature is not available.

  7. When recording a demo, ATC Communications, Crash and Maneuver Analysis systems are automatically turned off. It is not possible to record a demo showing these features.

  8. When recording a demo and DEMO RECORDER Option D is set to a 1 second recording interval, your keystrokes will be recorded for approximately twelve minutes. Stop demo recording within 12 minutes to retain the demo.

  9. When using a machine with a digital clock display (i.e., WYSE 286), the clock may advance minutes faster than normal time. When you quit Flight Simulator, the clock will reset to current system clock time.

  10. International users: If you are using a non-USA keyboard, some of the controls of Flight Simulator may not be assigned to the keys the documentation describes or the menus display. To confirm the correct key to press for a specific action, please refer to the Quick Reference Card and use the same physical key as indicated on the keyboard template, regardless of the letter or character it gives.

Copyright Microsoft Corporation 1991.