Difference between revisions of "Microsoft KB Archive/46810"

From BetaArchive Wiki
(importing KB archive)
 
m (X010 moved page Microsoft KB Archive/Q46810 to Microsoft KB Archive/46810 without leaving a redirect: Text replacement - "Microsoft KB Archive/Q" to "Microsoft KB Archive/")
 
(No difference)

Latest revision as of 19:24, 12 August 2020

“Printer Not Ready” When Printing to Parallel Port

PSS ID Number: Q46810 Article last modified on 11-02-1994

5.00 5.00a

MS-DOS

SUMMARY

On some computers, mostly IBM XTs or compatibles, Word 5.00 may issue the error message “Printer not ready” although all settings are correct and the printer is on line.

MORE INFORMATION

Below is a correction that can be made to the Word program file that allows Word to properly print via the parallel port.

To repair the Word program file, perform the following steps:

  1. Make a backup copy of your Word 5.00 Program Disk 1.

  2. Using the backup disk, rename WORD.EXE to WORD.XXX.

  3. Assuming DEBUG.COM is on your DOS Path, type DEBUG WORD.XXX.

  4. At the “-” prompt, type the following, then press ENTER:

    e 7ab5

  5. Type in 00 (two zeros), then press ENTER.

  6. Type “w” (without the quotation marks), then press ENTER.

  7. Type “q” (without the quotation marks), then press ENTER.

  8. Copy WORD.XXX to WORD.EXE.

  9. Run the Setup program to install a new copy of Word 5.00. The new program disk containing the repaired WORD.EXE file should be used during the installation process.

KBCategory: kbsetup kbprint kberrmsg KBSubcategory: Additional reference words: setup ============================================================================= Copyright Microsoft Corporation 1994.