PRB: FATAL: Internal Stack Failure, System Halted |
Q41024
6.00 6.00a 6.00ax 7.00 | 1.00 1.50 MS-DOS | WINDOWS kbenv kbprb ---------------------------------------------------------------------- The information in this article applies to: - Microsoft C for MS-DOS, versions 6.0, 6.0a, and 6.0ax - Microsoft C/C++ for MS-DOS, version 7.0 - Microsoft Visual C++ for Windows, versions 1.0 and 1.5 ---------------------------------------------------------------------- SYMPTOMS ======== For MS-DOS version 3.2 or later, the following message is issued by MS-DOS when too many interrupts occur too quickly and the pool of internal stack frames is exhausted: FATAL: Internal Stack Failure, System Halted RESOLUTION ========== Increasing the number of stacks allocated for use by interrupt handlers in the STACKS command in CONFIG.SYS usually corrects the problem. MORE INFORMATION ================ The syntax is as follows: STACKS=n,s n = number of stacks, ranging from 8 to 64, with 9 as the default s = size of each stack, ranging from 32 to 512 bytes, default of 128. For more information about the STACKS command, see page 805 of the "MS-DOS Encyclopedia." This error can occur if network cards, laboratory measurement instruments, and other devices are in use. They may generate many hardware interrupts, thus exhausting the MS-DOS stack resources. Note: For MS-DOS version 3.3 on an IBM-PC, IBM-XT, or IBM-PC-Portable, the default for n is 0 (zero) and s is 0. Additional reference words: 6.00 6.00a 6.00ax 7.00 1.00 1.50 KBCategory: kbenv kbprb KBSubcategory: TlsMisc
Keywords : kb16bitonly
Issue type :
Technology : kbVCsearch kbAudDeveloper kbPTProdChange kbvc150 kbvc100 kbCCompSearch kbZNotKeyword3 kbCComp600DOS kbCComp600aDOS kbCComp600axDOS kbCVC700DOS
Last Reviewed: May 6, 2001 |
