Microsoft KB Archive/41009

From BetaArchive Wiki
< Microsoft KB Archive
Revision as of 19:22, 12 August 2020 by X010 (talk | contribs) (X010 moved page Microsoft KB Archive/Q41009 to Microsoft KB Archive/41009 without leaving a redirect: Text replacement - "Microsoft KB Archive/Q" to "Microsoft KB Archive/")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Mac Works: Grid Alignment in Draw Layer

PSS ID Number: Q41009 Article last modified on 10-22-1998

2.0 3.0 4.0


The information in this article applies to:
- Microsoft Works for the Macintosh, versions 2.0, 3.0, and 4.0


For objects to line up with exact ruler markings (and with each other) in the Microsoft Works draw layer or draw module, they must be drawn with the Grid On option already selected.


Each object in the draw layer has its own starting reference point with respect to the Works grid. Therefore, objects that are drawn before the grid is turned on cannot be aligned to any “absolute” grid after they are drawn. They will move in increments equal to the appropriate grid settings when Grid On is selected, and will do so relative to their original position, not relative to the marks on the ruler. The same is true of graphics pasted in from another application.

In Works 4.0 you can also use the Alignment Tool located on the toolbar to align several objects to the grid.

KBCategory: kbother KBSubcategory: macworkskb

Additional reference words: 2.00 mwksdrw

Version : 2.0 3.0 4.0 Platform : MACINTOSH Issue type : kbinfo ============================================================================= Copyright Microsoft Corporation 1998.