System Requirements for Works Versions 1.x, 2.0 and 3.0
PSS ID Number: Q36634 Article last modified on 10-16-1998
1.00 1.05 2.00 3.00
MS-DOS
====================================================================== 1.00 1.05 2.00 3.00 MS-DOS kbprint
| The information in this article applies to: |
| - Microsoft Works for MS-DOS, versions 1.x, 2.0 and 3.0 |
SUMMARY
The minimum system requirements for using Microsoft Works for MS-DOS versions 1.x, 2.0 and 3.0 are as follows:
Versions 1.0 and 1.05
- 384K memory
- MS-DOS version 2.0 or higher
- Two 360K drives or one 720K disk drive or a hard drive
- CGA, EGA, VGA, or Hercules graphics adapter card required for charting
Version 2.0
- IBM PC XT, AT, PS/2, or compatible computer
- 512K memory
- MS-DOS or PC-DOS version 2.0 or higher (version 3.1 or higher if on a networked workstation)
- Two 360K disk drives, one 720K disk drive, one 1.44 MB disk drive, or a hard drive (hard drive recommended)
- CGA, EGA, VGA, MCGA, Tandy 1000 Video Graphics or Hercules graphics adapter card required for charting and print preview
Version 3.0
- IBM PC XT, AT, PS/2, or compatible computer using an 8086 or higher processor
- 640K memory
- MS-DOS operating system version 3.0 or higher (version 3.1 or higher if on a networked workstation)
- one 720K disk drive, one 1.44 MB disk drive, one 1.2 MB disk drive, or a hard drive (hard drive recommended)
- CGA, EGA, VGA, XGA, MCGA, Tandy 1000 Video Graphics or Hercules graphics adapter card required for charting and print preview.
Optional for All Versions of Works
- Microsoft Mouse or compatible
- Hayes-compatible modem
- A printer
KBCategory: kbprint KBSubcategory: dworkskb
Additional reference words: 1.00 2.00 3.00 RAM required system minimum configuration specifications ====================================================================== Version : 1.00 1.05 2.00 3.00 Platform : MS-DOS ============================================================================= Copyright Microsoft Corporation 1998.
